Pelco DX4104 DVR User Manual


 
60 C4631M-A (8/10)
Appendixes
APPENDIX A: DX4104 FACTORY DEFAULTS
NOTE: Resetting the DVR to factory defaults deletes the customized settings. To save the customized settings, be sure to perform a
configuration export before resetting the DVR to the factory defaults. For information about exporting the configuration settings, refer to
Export/Import Configuration Settings on page 59.
Table H. Factory Default Settings (1 of 4)
Menu Command Option Property Default Setting
Factory
Default
Client
Application
Camera Properties Channel 01 to 04 Yes Yes
Name CH 01 to 04 Yes Yes
Covert OFF Yes Yes
Audio 01 to 04, NONE Yes Yes
PTZ Channel CH 01 Yes Yes
Port NONE Yes Yes
Address 0 Yes Yes
Protocol PELCO_D Yes Yes
Baud Rate 9600 Yes Yes
Video Video Format NTSC Yes No
Normal Record Channel CH 01 to CH 04 Yes Yes
Resolution 352X240 (NTSC) / 352X288 (PAL) Yes Yes
Quality STANDARD Yes Yes
Image rate 7.5 (NTSC)/6.25 (PAL) Yes Yes
Prealarm OFF Yes Yes
Postalarm 10 SEC Yes Yes
Alarm Record Channel CH 01 to CH 04 Yes Yes
Resolution 352X240 (NTSC) / 352X288 (PAL) Yes Yes
Quality STANDARD Yes Yes
Image rate 30 (NTSC)/25 (PAL) Yes Yes
Motion Record Channel CH 01 to CH 04 Yes Yes
Resolution 352X240 (NTSC) / 352X288 (PAL) Yes Yes
Quality STANDARD Yes Yes
Image rate 30 (NTSC)/25 (PAL) Yes Yes
Instant Record Channel CH 01 to CH 04 Yes Yes
Resolution 352X240 (NTSC) / 352X288 (PAL) Yes Yes
Quality STANDARD Yes Yes
Image rate 30 (NTSC)/25 (PAL) Yes Yes
Schedule Sun to Sat 1 to 4 Alarm/Motion Yes Yes
Holiday 1 to 4 No record Yes Yes