Filter
Top Products
C4631M-A (8/10) 13
UNIT SHUTDOWN
The Power Off feature allows you to properly shut down the unit. Only users with administrator-level permissions can access the Power Off
feature, which is located in the shortcut menu.
1. To shut down the unit:
a. Log on to the unit with administrator-level permissions.
b. Right-click a pane in the application window. The shortcut menu appears.
Figure 6. Application Window Shortcut Menu
c. Click the Power Off button. The on-screen keyboard appears.
d. Type the administrator password.
e. Click OK.
2. Disconnect the power cord.
NOTE: The power cord must be disconnected and then reconnected before you can log on to the unit again.
ABOUT BASIC SYSTEM DEFAULTS
The DX4104 comes preconfigured with system defaults that allow the DVR to be used to immediately to view and record video. For a list of
system defaults, refer to Appendix A: DX4104 Factory Defaults on page 60.
WORKING IN THE APPLICATION WINDOW
By default, the toolbar is displayed at the bottom of the application window. It cannot be moved to a different location.
TOOLBAR DISPLAY
To hide or display the toolbar:
1. Right-click a pane in the application window. The shortcut menu appears (refer to Figure 6).
2. Click the “Control bar On/Off” button.
WARNING: Do not disconnect the power cord to shut down the unit. You must perform the proper shutdown procedure to avoid data loss.