Filter
Top Products
97
The symbols on your DVD recorder display
These symbols can light up on your DVD recorder display:
Multi-function display/text line
•) Clock.
•) Disc/title playing time
•) Title name.
•) Display of the programme number of the TV channel/playing
time/channel name/function.
•) Display of information and alerts.
•) Display of the title from the actual recording.
IIIIIIIIIIIIIII Position/Diskbar: Displays the current position on the
HDD/disc.
Time Shift Buffer Displays the elapsed time. If all segments lits, the
oldest recording will be deleted from the Time Shift Buffer.
Play/Record: No segment will lit at the current position.
Pause: Flashing segment at the current position.
Stop: Nothing appears.
SAT An automatic recording from a satellite receiver (SAT
recording) has been programmed.
TIMER A recording (timer) has been programmed.
o((( A remote control signal has been received.
VPS/PDC Video programming system / programme delivery control:
A VPS or PDC code is transmitted for the selected TV program.
LANG II During playback a 2-channel tone was detected or a
2-channel tone was received. 'I' or 'II' lights up depending on which
sound channel has been selected.
Messages in the DVD recorder display
READING
The following messages may appear in your DVD recorder display
IS TV ON? The DVD recorder is in initial installation mode. Switch
the TV on, then read the paragraph on 'Initial installation' in
'Installing your DVD recorder'.
NO SIGNAL No input signal available (signal inadequate or unstable).
MENU The menu on the screen is active.
OPENING Disc tray opening.
TRAY OPEN Disc tray open.
CLOSING Disc tray closing.
READING Disc being read.
MENU UPDATE Once recording has been successfully completed the
table of contents is created.
CREATE MENU The menu structure is created after the first recording
has been made on a new disc.
COPYPROTECT You received a copy-protected signal. This may come
from a copy-protected DVD/videotape of a DVD/video player or
from a TV channel.
During the display COPYPROTECTno recording will be made. A
running recording will be interrupted.
WAIT Please wait until this message disappears. The DVD recorder is
busy performing a task.
NO DISC A disc has not been inserted for recording. If a disc has been
inserted, it cannot be read.
INFO Information about the inserted DVD is displayed on the screen.
BUSY The DVD recorder is processing the changes to make the disc
DVD compatible.
ERASING The entire DVD+RW is being erased.
EMPTYDISC The DVD+RW, DVD+R inserted is either new or has
been completely erased (no recordings).
PROTECTED The DVD+RW, DVD+R inserted is protected against
recording.
How to remove this protection you will read in the section
'Protect disc against accidental recordings' in the chapter
'Recording on a DVD+RW, DVD+R' .
MAX TITLE The maximum number of titles per disc/HDD has been
reached. The maximum number of titles on a disc is 48 and on the
HDD 499.
The DVD recorder display