Filter
Top Products
8
Front of the device
1 STANDBY-ON m
Switch device off / on.
2 Disc tray
Red light around the disc tray indicates recording on a DVD+RW,
DVD+R.
3 OPEN/CLOSE J
Open/close the disc tray.
4 GUIDE
Call up/Cancel the GUIDE Plus+
®
system
When the GUIDE Plus+
®
system is active, this button lights up
white.
5 OK
Confirm the entry/function.
6 Navigation buttons
UP , DOWN
Cursor buttons up, down in the menus.
Moves cursor up/down in the GUIDE Plus+
®
system.
Previous or next title in the Time Shift Buffer during playback from
HDD.
LEFT , RIGHT
Cursor buttons left, right in the menus.
Previous or next position during playback of a title from the HDD
(media browser or Time Shift Buffer).
7 HDD
Call up the media browser (overview of recordings on the HDD).
During a recording on the HDD this button lights up blue.
8 N
Previous title/search backwards.
9 G Playback button
Play back a recorded disc or a title on the HDD.
0 n Record button
Stores the current TV show on the HDD, mark recordings in the
Time Shift Buffer to be stored on HDD. Red light around this
button indicates:
•) a recording on a DVD+RW, DVD+R (archiving of titles)
•) storing of a recording(s) on the HDD.
A h Stop button
Interrupt playback/recording.
B O
Next title/search forwards.
Behind the flap at the righthand corner on the front
C S-VIDEO (CAM1) : Connector for SVHS/Hi8 camcorders or
SVHS/Hi8 video recorders (programme number 'CAM1')
D Yellow socket
VIDEO (CAM1) : Video input socket: Connector for
camcorders or video recorders (programme number 'CAM1')
E White/red socket
L AUDIO R (CAM1) : Audio input socket left/right :
Connector for camcorders or video recorders (programme
number 'CAM1')
F DV IN (CAM2) : digital video input (DV format only), IEEE 1394,
FireWire for connecting a digital camcorder or other suitable
device (programme number 'CAM2').
Switching between the sockets VIDEO (CAM1)
DD, S-VIDEO
(CAM1)
CCis done automatically. If a signal is available at both
sockets at the same time, the signal at the S-VIDEO
(CAM1)
CCsocket has priority.
If you change the socket (unplug), you must re-select the socket. (Button
CHANNEL r
S and then CHANNEL q P )
Introduction to the set