Filter
Top Products
84
General
This section describes how you can adjust the functions of the HDD to
your personal preferences.
When you press BROWSER HDD
H and then SYSTEM
MENU
A , a so-called puck 'Z' appears on a line.
If there are further selection options within a line, an arrow e.g.: '
S'. will
appear in the respective segments e.g.: '
W'. Using the corresponding
buttons on the remote control(e.g. C
M ) you can call up further
features or selection options.
Preparation:
•) Switchon the TV, and if necessary,select the programme number for
the DVD recorder.
•) Switchon the DVD recorder.
1 Press TUNER
0 on the remote control to switch to HDD mode.
You can also switch to HDD mode by pressing BROWSER
HDD
H but you will not see the picture of the currently selected TV
channel as a background picture.
2 Press SYSTEM MENU A on the remote control
P The system menu for the HDD appears.
SYSTEMMENU
Options
Toolbar
Preferences
Setup
3 Select the corresponding line using B O or A I .
O If the arrow C in the puck 'Z' is visible in one of the lines,
you can select additional functions with C
M on the remote
control.
O To return to the previous menu, keep pressing A I until
the top menu item is selected.
Press D
K to return to the previous menu item.
SYSTEMMENU
Options
Toolbar
Preferences
Setup
4 Select the corresponding function using B O or A I , or the
setting with D
K or C M . Select the functions you want to
change as described in the following pages.
5 Confirm the new setting with OK
L .
6 Close the menu item with D K .
ENGLISH
User preferences / settings I