Filter
Top Products
96
'Auto standby'
If you haven't used the DVD-recorder for a few minutes in certain modes (e.g.: STOP), it will
switch to standby automatically. You can cancel this function to use the DVD-recorder as a
television receiver.
'On': The DVD-Recorder leave switched on.
'Off': The DVD-Recorder will be switched to standby.
'Standby'
To save power, you can switch off the clock display on the DVD recorder. Programmed
(TIMER) recordings will still take place.
In addition, you can present the most important features of the DVD recorder in scrolling text
in the display (demo).
'Low power': If the DVD-Recorder is switched off (button STANDBY m ), the clock display is
also switched off.
'Normal': If the DVD-Recorder is switched off (button STANDBY m ), the clock display is
visible.
'Demo mode': If the DVD recorder is switched off with the STANDBY m button, a list of the
most important features is shown in the display.
'Display'
You can change the brightness of the display on the DVD recorder. This setting only affects the
DVD recorder when it is switched on.
You can also adjust this setting with the DIM button on the remote control.
'Bright': The display appears with normal brightness.
'Dimmed': The display appears less bright.
'Off': The display is switched off.
Remote Control settings
In this menu you can set the remote control type to which your DVD recorder should respond.
'DVD player': The DVD recorder responds to the supplied remote control and the remote
control of a DVD player (remote control code RC-6).
Choose this setting if your Philips TV remote supports DVD functions.
'DVD recorder': The DVD recorder only responds to the supplied remote control.
User preferences