Filter
Top Products
89
Programming recordings without the
ShowView
®
System
1 Switch on the TV set. If required, select the programme number for
the DVD recorder.
2 Press TIMER s on the remote control.
The programming method selected last is marked.
Timer
Timer programming
Date
01
Prog.
BBC1
Start
20:15
VPS
PDC End
21:30
Rec
Mode
M1
Mo-Fr/Weekly
Press SELECT
To store
Press OK
3 Select line 'Timer programming' with B or A . and confirm with
the C button.
The information will appear on the screen.
4 Select the input field with D or C .
5 Enter information with B or A or with the number buttons 0..9 .
Selecting daily/weekly recordings
In 'Date' use SELECT to select from the following options:
'Mo-Fr': Repeated daily recordings from Monday to Friday
'Mon': Repeated weekly recordings (every week on the same day, e.g.
Monday).
Programme numbers of the 'EXT1' and 'EXT2'scart socket
You can also programme recordings from external sources via scart socket
EXT 1 TO TV-I/O ('EXT1') or EXT 2 AUX-I/O ('EXT2').
'Switching on 'VPS/PDC' in the 'Start' input field
Select the 'Start' input field using TIMER s . Using SELECT switch on
'VPS/PDC' ('*' lights up). If you press SELECT again, you will switch
'VPS/PDC' off ('*' goes out).
Changing the recording quality in input field 'End'
Select the 'End' input field using C .
Use SELECT to select the recording mode.
Tip
6 If all information is correct, press the OK button. The programming
information is stored in a TIMER block.
7 To end, press TIMER s .
The disc you have inserted will be checked.
8 Search the position on the disc where the recording should begin.
9 Switch off with STANDBY m .
The programmed recording will only function properly if the DVD
recorder has been switched off using the STANDBY m button.
If any of the TIMER blocks are in use, 'TIMER' will light up on the recorder display.
ENGLISH
Programming a recording (TIMER)