Philips DVDR 77/02 DVD Recorder User Manual


 
13
6 Switch on the TV set.
7 Use the supplied mains cable to connect the mains socket
4MAINS at the back of the DVD recorder with the wall outlet.
The most important features of the DVD recorder will appear in
scrolling text on the display. After the first installation is completed
this function will be switched off. How you switch on this function
again, read in the chapter 'User preferences' in the section 'standby'.
EasyLink
loading datafrom TV;
please wait
8 Switch on the DVD recorder using STANDBY-ON m .
A message appears on the screen announcing that the transfer has
started. 'EASYLINK' appears on the display during transfer.
The TV set transfers all saved TV channels, in the same order, to the
DVD recorder
This may take several minutes.
a'Time', 'Year', 'Month', 'Date' appears on the TV screen
1 Check if the time in 'Time' is correct.
2 If required, change the time with the number buttons 0..9 on your
remote control.
3 Select the next line with A or B .
4 Check if the displayed settings for 'Year', 'Month' and 'Date' are
correct.
5 When all information is correct, save by pressing OK .
Problem
Virgin mode
Audio Language
English
Español
Français
Português
Italiano
Press OKto continue
aI can see more installation menus on my TV set
Not all the necessary data has been transferred. Please enter the settings
by hand as follows. For more information on the various functions see
'Initial installation' in 'Installing your DVD recorder'.
1 Select the desired audio language using B or A and confirm with OK .
2 Select the desired subtitle language with B or A and confirm with
OK .
3 Select the desired screen format position using B or A .
'4:3 letterbox' For a 4:3 TV set; cinema format (black bars above and
below the picture)
'4:3 panscan' For a 4:3 TV set; full height format with the sides cut off
'16:9' For a 16:9 TV set
4 Confirm with OK .
5 Select the country of your residence with B or A .
If your country does not appear, select 'Other'.
6 Confirm with OK .
Problem
Initial installation is now complete.
ENGLISH
Connecting the DVD recorder