Filter
Top Products
87
Programming recordings with the
ShowView
®
System
Thanks to this programming system, you no longer need to tediously enter the date, programme
number, start and finish times. All the information needed by the DVD recorder for
programming is contained in the ShowView
®
programming number. This 9-digit ShowView
®
number is found in most TV listings magazine.
1 Switch on the TV set. If required, select the programme number for
the DVD recorder.
2 Press TIMER s on the remote control.
The programming method selected last is marked.
3 Select 'ShowView system' using B or A and confirm with C .
4 Enter the entire ShowView number. This number is up to 9 digits long
and can be found next to the start time of the TV programme in your
TV listings magazine.
e.g.: 5-312-4 or 5,312 4
Enter 53124 for the ShowView-number.
If you make a mistake, you can clear your instructions with CLEAR .
Timer
ShowView system
ShowView number
---------
Mo-Fr/Weekly
Press SELECT
To store
Press OK
Selecting daily/weekly recordings
Using SELECT , select from the following options:
'Mo-Fr': Repeated daily recordings (Monday to Friday).
'Weekly': Repeated weekly recordings (every week on the same day).
Tip
5 Confirm with OK .
ENGLISH
Programming a recording (TIMER)