Filter
Top Products
13
User manual
ENGLISH
3 Press the + or − buttons (5) to highlight the SETUP menu item
and press the ENTER smart button (2b).
4 Press the + or − buttons to highlight the VOICE CMD
TRAINING menu item and press the ENTER smart button
(2b). The voice command setting must be activated in Philips
SpeechExec or the software application of your system integrator
for this option to appear in the menu.
5 The first keyword is displayed. Press and hold the VOICE smart
button (2a) and say the keyword. Press the + button to skip
training the current item and continue to the next.
6 The Digital Pocket Memo will prompt you to repeat the word.
Press and hold the VOICE smart button and say the keyword
again. If the training is successful, the Digital Pocket Memo will
automatically advance to the next keyword. Repeat from step 5
until you have trained all keywords.
D Note: If you have configured Voice Command to use
alphanumeric characters the training procedure starts with with
numbers (0-9), followed by letters (A-Z), then special characters.
For recognition of letters, say the word for each letter, such as
“alpha” for A, “bravo” for B and so on.
E Tip: Voice recognition performance can be adversely aected by
background noise during training, or words that sound similar,
such as “four” and “door”. The Digital Pocket Memo may prompt
you to repeat the training procedure to guarantee reliable voice
recognition.
5.3.2 Enter keywords using voice command
1 The 4-position slide switch (12) must be in the STOP position.
2 Press and hold the VOICE smart (2a) button to activate the
keyword recognition mode.
3 Say the keyword or the word for the next character. If the
word is recognized, the corresponding keyword or character is
displayed.
4 Repeat from step 3 until you have entered all characters of the
keyword.
5 Release the VOICE smart button. The keyword is displayed
6 Press the OK smart button (2b) to accept the keyword and
assign it to the current recording, or repeat from step 2 to
modify the keyword.
D Note: A keyword can have a maximum of 15 characters. For
more than 7 characters, the character size will be reduced to fit
the display.