Pioneer DVR-3100 DVD Recorder User Manual


 
Recording
06
56
En
Recording from the DV output
You can record non-copy-protected material from a DVD
to a camcorder connected to the
DV IN/OUT
jack.
1 Connect the camcorder to the DV IN/OUT jack of
this recorder.
2 Find the place you want to start recording from.
3 Start recording on the camcorder.
4 Play the source material.
Playing your recordings on other DVD
players
Most regular DVD players can play finalized discs
recorded in Video mode. A number of players (including
many Pioneer models) can also play DVD-RW discs
recorded in VR mode, finalized or not. Check the manual
that came with the player to check what kinds of discs it
will play.
When you finalize a Video mode disc, a title menu is
created from which you can select titles when you play
the disc. There are a number of different styles of title
menu to choose from to suit the content of the disc.
All the title menus are navigated in the usual way,
pressing
MENU
or
TOP MENU
to display the menu, then
using the
///
(cursor buttons) followed by
ENTER
to select titles and start playback.
Finalizing a disc
Finalizing ‘fixes’ the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Note that the disc name will appear in the title menu after
you finalize a disc. Make sure the disc name is as you
want it before you finalize the disc as it can’t be changed
afterwards. If you want to rename the disc, see
Input Disc
Name
on page 70 before starting the steps below.
Important
Once you’ve finalized a disc recorded in Video mode,
you can’t edit or record anything else on that disc.
However, the finalization on a DVD-RW disc maybe
‘undone’; see
Undo Finalize
on page 71 for how to do
this.
•A VR mode disc can still be recorded and edited on
this recorder even after finalizing.
1 Load the disc you want to finalize.
Make sure that the recorder is stopped before
proceeding.
2 Press HOME MENU and select ‘Disc Setup’.
3 Select ‘Finalize’.
4 Select ‘Finalize’ from the finalize options, then
‘Start’.
The recorder starts finalizing the disc.
If the finalization process is going to take more than
around 4 minutes, you can press
ENTER
to cancel.
Around 4 minutes before completion, the option to
cancel disappears.
How long finalization takes depends on the type of
disc, how much is recorded on the disc and the
number of titles on the disc. A disc recorded in VR
mode can take up to 1 hour to finalize. A disc
recorded in Video mode can take up to 20 minutes.
5 For Video mode discs only, select a title menu
style.
The menu you select will be the one that appears when
the ‘top menu’ is selected on any DVD player.
Discs recorded partially or fully on the Pioneer
DVR-7000 DVD recorder do not support this feature.
These discs will have only a text title menu when
finalized on this recorder.
Note
If the TV line system of the disc is different to the
current setting of the recorder, you will not be able to
finalize the disc. See
Input Line System
on page 76 for
how to change the recorder’s setting.
VR mode Video mode
VR mode Video mode
VR mode Video mode
Finalize
Undo Finalize
Start
Start
Disc Setup
Basic
Initialize
Finalize
T
I
T
L
E
M
E
N
U
TITLE MENU
Finalize
DVR-03_EU.book 56 ページ 2003年7月28日 月曜日 午後7時19分