Filter
Top Products
The Initial Setup menu
12
83
En
English
If your AV receiver (or other connected component) is
Dolby Digital compatible, set to
Dolby Digital
, otherwise
set to
Dolby Digital
PCM
. Check the manual that
came with the connected component if you’re unsure
whether it is Dolby Digital compatible.
DTS Out
You only need to make this setting if you connected this
recorder to an AV amplifier (or other component) using the
digital output.
• Default setting:
On
If your AV receiver (or other connected component) has a
built-in DTS decoder, set to
On
, otherwise set to
Off
.
Check the manual that came with the connected
component if you’re unsure whether it is DTS
compatible.
Important
• If you set to
On
with a non-DTS compatible amplifier,
noise will be output when you play a DTS disc.
• When set to
On
, there is no analog audio output
when playing a DTS DVD-Video disc.
• When playing a DTS audio CD (even when
DTS Out
is
Off
), noise is output from the analog outputs.
Do
not play this through your amplifier and speakers.
• When playing a DTS audio CD, make sure that
Stereo
is selected using the
AUDIO
button. See
Switching DVD soundtracks
on page 43.
96kHz PCM Out
You only need to make this setting if you connected this
recorder to an AV amplifier (or other component) using the
digital output.
• Default setting:
96kHz
48kHz
If your AV receiver (or other connected component) is
compatible with high sampling rate audio (88.2 / 96 kHz),
set to
96kHz
, otherwise set to
96kHz
48kHz
. Check
the manual that came with the connected component if
you’re unsure whether it is compatible with high
sampling rate audio.
MPEG Out
You only need to make this setting if you connected this
recorder to an AV amplifier (or other component) using the
digital output.
• Default setting:
MPEG
PCM
If your AV receiver (or other connected component) is
MPEG audio compatible, set to
MPEG
, otherwise set to
MPEG
PCM
. Check the manual that came with the
connected component if you’re unsure whether it is
MPEG compatible.
Language settings
OSD Language
• Default setting:
English
This sets the language of the on-screen menus and
displays.
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
On
Off
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
96kHz 48kHz
96kHz
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out
MPEG
MPEG PCM
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
OSD Language
Audio Language
Subtitle Language
Auto Language
DVD Menu Language
Subtitle Display
English
Français
Deutsch
Italiano
Español
Initial Setup
DVR-03_EU.book 83 ページ ２００３年７月２８日 月曜日 午後７時１９分