The Initial Setup menu
12
81
En
English
•
Decoder
– Use this setting if you are using a decoder
connected to the
AV2/(INPUT 1/DECODER)
input.
(For scrambled channels, make sure that the manual
channel
Decoder
setting is set to
On
—see also
Manual CH Setting
on page 78).
NTSC on PAL TV
• Default setting:
On
When set to
On
, NTSC discs (from the U.S., for example)
will play correctly on a PAL-only TV. Change to
Off
if your
TV is already NTSC-compatible.
Depending on this setting and the Input Line System
setting (see
Input Line System
on page 76), the signal
format output when the recorder is stopped varies as
shown in the table below.
Note
• Many recent PAL TVs are capable of correctly
displaying NTSC pictures without the need for this
setting. Check the manual that came with your TV if
you’re not sure whether yours has this feature.
Audio In settings
NICAM Select
• Default setting:
NICAM
If you want to record the non-NICAM audio in a TV
broadcast, select
Regular Audio
, otherwise set to
NICAM
. (When set to
NICAM
, you can still select
Regular Audio
using the
AUDIO
button. See
Changing
audio channels
on page 29.)
Tuner Level
• Default setting:
Normal
Set to
Compression
if the audio level from the built-in
tuner is excessively high causing distortion.
External Audio
• Default setting:
Stereo
If the external source is standard stereo, leave set to
Stereo
. If each channel carries a separate soundtrack,
change to
Bilingual
.
When the external audio is from the DV input, an audio
subcode channel within the DV audio tells the recorder
whether the audio is stereo or bilingual. This has priority
over the setting you make here.
Input Line System
NTSC on PAL
TV
Output when
stopped
625 System Off PAL
On PAL
525 System Off NTSC
On PAL–60
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Input Colour System
AV1 Out
AV2/L1 In
NTSC on PAL TV
On
Off
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
NICAM Select
Tuner Level
External Audio
Bilingual Recording
DV Input
Input Level (L1)
Input Level (L2)
Input Level (L3)
NICAM
Regular Audio
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
NICAM Select
Tuner Level
External Audio
Bilingual Recording
DV Input
Input Level (L1)
Input Level (L2)
Input Level (L3)
Normal
Compression
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
NICAM Select
Tuner Level
External Audio
Bilingual Recording
DV Input
Input Level (L1)
Input Level (L2)
Input Level (L3)
Stereo
Bilingual
Initial Setup
DVR-03_EU.book 81 ページ 2003年7月28日 月曜日 午後7時19分