Filter
Top Products
Chapter 3 Shooting
Chapter 3 Shooting 39
2 Press the EJECT button to open the cassette holder, and insert the
cassette.
Make sure that the cassette’s REC/SAVE switch is set to REC, then
check for tape slack before loading the cassette.
For details on handling cassettes, see “Cassettes for the DSR-1/1P” on page
35.
Inserting a standard-size cassette
Inserting a mini-size cassette
Press on “PUSH” on the cassette holder solidly to close the holder.
Notes
• Turn the power on and then insert or eject the cassette.
• When inserting a mini-size cassette, confirm the cassette is under the
lock (see the above figure), and then close the cassette holder. If the
cassette is not inserted fully under the lock, a stopper will prevent the
cassette holder from closing when you press down on it.
Indication “PUSH”
Cassette holder
window
Insert the cassette with the cassette window (on the front) facing
outward. Push the cassette between the both guides along the
stage until it goes under the lock.
Guides
Lock
Mini-size cassette
match marks
Insert the cassette with the cassette window (on the front) facing outward.
Stage
Cassette holder window
Indication
“PUSH”
(Continued)