Filter
Top Products
Chapter 5 ClipLink Shooting
Chapter 5 ClipLink Shooting 59
5 Press the VTR button on the camera or the lens.
This starts the recording function.
6 When the recording is finished, set recording pause
mode (or specify a Mark OUT point).
The time code (HH:MM:SS), scene number (serial
number of scene during which recording was
stopped) and other data for the current clip
(contents between the Rec IN and Rec OUT points
or between Mark IN and Mark OUT points) are
recorded into cassette memory. The index pictures
for the recorded scene are recorded after the
recorded scene.
Repeat steps 5 and 6 to start recording the next
scene.
The index pictures are recorded onto the tape as
described below.
When all index pictures are recorded at the end
of the recordings
When two or more series of index pictures are
separately recorded
Two or more series of index pictures may be
recorded if ClipLink shooting is once interrupted
due to ejecting the cassette and resumed (in case of
changing the camcorder on resuming, for
example).
If there is no need for ClipLink continue
It is not necessary to press the ClipLink CONTINUE
button when restarting recording.
See step 4 in the previous section “Resuming
Recording in ClipLink Mode”.
The contents recorded on the cassette may differ in this
case depending on the settings when the recording is
restarted.
When recording in ClipLink mode is started and
previous recording is overwritten
When recording in ClipLink mode is started after a
previous recording
Insert cassette in camcorder B
ABC DEFG
DEFGABC
Clip
Recording
start
Recording
stop
Remove
cassette
Index pictures A
Camcorder A Camcorder B
Recording
restart
(ClipLink
continue)
Index pictures B
Recording
stop
Previous
recording
New
recording
Previous index pictures:
erased
New index pictures
are recorded.
ClipLink log data: overwritten by new data
Previous index pictures:
retained but invalid
ClipLink log data:
overwritten by new data
New
recording
Previous
recording
New index pictures are recorded.
ABCD
EFG
ABCDEFG
Clip
Recording stop
Recording restart
(ClipLink continue)
Index pictures
Recording
start
Recording
stop