Filter
Top Products
Chapter 2 Fitting and Connecting Related Equipment
24 Chapter 2 Fitting and Connecting Related Equipment
Mounting on Video Camera
The DSR-1/1P is dockable with the DXC-D30/D30P/D35/D35P digital
video camera or with a DXC-637/537/537A/327A/327B series analog
video camera.
Switch the camera connectors according to the camera to be used.
Using a DXC-D30/D30P/D35/D35P: Use the PRO 76-pin DIGITAL
connector.
Using a DXC-637 series camera: Use the PRO 50-pin connector.
Note
Turn the POWER switch off before mounting the DSR-1/1P on the video
camera.
Using the DXC-D30/D30P/D35/D35P
Replace the PRO 50-pin connector with the PRO 76-pin DIGITAL
connector.
1 Loosen the two screws (M3)
and remove the cover from the
PRO 50-pin connector.
2 Press the right side of the PRO
50-pin connector until the PRO
76-pin DIGITAL connector
appears.
The both connectors swing to
switch the positions by
pressing either of them.
Cover
PRO 50-pin connector PRO 76-pin DIGITAL connector
PRO 50-pin connector