Filter
Top Products
- English
Settings
Setting the feature to
lets the product adjust its HDMI output to 24
frames per second automatically for improved
picture quality if attached to a 24Fs compatible TV.
~
You can enjoy the feature
only on a TV supporting this frame rate.
~
Movie Frame is only available when the
product is in the HDMI 1080p output
resolution modes.
Converts DVD playback to 24 frames per
second and outputs it via HDMI. This option is
only available when is set
to on.
Lets you select the optimal size for the Smart
Hub or screen.
Lets you set the color space format for the
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
Lets you set the product to output video
from the HDMI OUT jack with Deep Color.
Deep Color provides more accurate color
reproduction with greater color depth.
Lets you improve picture quality when viewing
DVDs.
Lets you configure the settings of the speakers
you have connected to obtain the best possible
surround sound.
: Select if you have set up your
speakers in the recommended speaker layout
with the surround speakers next to or behind
the listening positions.
: Select if you have put your
surround speakers in front of the listening
position. Downmixes the front sound to the
surround sound speakers.
✎
SFE, Virtual 7.1 will not operate when the
simple mode is on.
: Lets you select which speakers
are active, either the TV's speakers or the home
theater's speakers.
: Lets you
adjust the following speaker settings and
turn the test tone on and off so you can test
the speakers.
-
: Lets you adjust the relative
loudness of each speaker from 6dB to -6dB. For
example, if you like deep bass, you can increase
the loudness of the subwoofer by 6dB.
-
:
Lets you adjust the relative
distance of each speaker from the listening
position up to 30 feet. The farther the
distance, the louder the speaker will be.
-
:
Begins a test to set the best
surround sound configuration. Press
to stop the test while it is in progress.
: You can enjoy
sound through a remote speaker that is
connected to the home theater through your
home network. To use the network speaker,
select . If there is a network
speaker available, it will appear on the screen.
-
: The network speaker is not used.
-
: The network speaker outputs
audio. All network speakers output the
same audio regardless of channel using the
PCM format only.
✎
and are not
applied if is set to on.
✎
The network speaker is not available when
is active.
✎
For further details, refer to the Multiroom
Link manual from the web site.
www.samsung.com > Support > Search for the
product name > Multiroom Link > Download PDF
Sound Customizer lets you calibrate the home
theater for the optimal sound quality based on
your hearing level and the ambient conditions.
To create a Custom Sound Profile, follow these
steps:
In the Menu, select
.
On the next screen, select . The
screen appears.
Select to preview the Test Sound.
Select , and then press to continue.