Filter
Top Products
- English
Settings
✎
Text files, such as files with a .TXT or .DOC
extension, will not display when you are using
the function.
Upgrading Software
The menu allows you to
upgrade the product’s software for performance
improvements or additional services.
~
Never turn the product off or back on
manually during the update process.
In the Home menu, select , and then
press the button.
Select , and then press the
button.
Select , and then press the
button.
To download update software and update
now, select , and then press the
button. See "Update now" on this page
for details.
To let the product download update software
automatically when available, select
, and then press the button. (See
page 24)
✎
The upgrade is complete when the product
turns off, and then turns on again by itself.
✎
Samsung Electronics takes no legal
responsibility for product malfunction
caused by an unstable Internet connection
or consumer negligence during a software
upgrade.
✎
If you want to cancel the upgrade while the
upgrade software is downloading, press the
button.
✎
When a system upgrade is in progress,
"UPDATE" is displayed on the front panel.
You can use to update the software
through your network connection or by using
a USB flash drive. The network instructions are
below. The USB flash drive instructions are on the
next page.
Select , and then press the
button.The Update now pop-up appears.
The product searches on line for the latest
software version.
If it does not find an update, the "There are
no new updates for you at the moment."
pop-up appears. Press the button to exit.
If it finds a new version, the Update Request
pop-up appears.
Select . The product upgrades the
software, turns off, and then turns on
automatically.
If you do not select or in one
minute, the product stores the new upgrade
software. You can upgrade the software later
using .
If you select , the product cancels the
upgrade.
✎
When the system upgrade is done, check the
software details in the Product Information
section of the Contact Samsung screen.
✎
Do not turn off the product during the
Software Upgrade. It may cause the product
to malfunction.
You can set the function so that the
product downloads new upgrade software when
it is in mode.
In mode, the product is on, but
its Internet connection is active. This allows
the product to download upgrade software
automatically, when you are not using it.
Press the
,.
buttons to select
mode, and then press the button.
Select or .
If you select , the product will
automatically download new upgrade
software when it is in Auto Update mode
with the power on. If it downloads new
upgrade software, the product will ask you
if you want to install it when you turn the
product on.
✎
To use the function, your product
must be connected to the Internet.