Filter
Top Products
- English
Scroll the list down, select , and
then press the button.
Press the button on your
router within two minutes. Your product
automatically acquires all the network
settings values it needs and connects to your
network after the network connection is
verified.
When it is done, highlight , and then
press the button.
✎
For a WPS connection, set your wireless
router’s security encryption to AES. WEP
security encryption does not support a WPS
connection.
Wi-Fi Direct
The function allows you to connect
devices to the product and each other
using a peer-to-peer network, without a wireless
router.
✎
Some devices may not support
the AllShare function if connected via
. If this is the case, change the network
connection method you used to connect the
device to the home theater.
✎
transmissions can interfere
with Bluetooth signals. Before you use the
Bluetooth function, we strongly recommend
that you turn off the function on
any device in which it is currently on.
Turn on the device and activate
its function.
In the Home screen, select , and then
press the button.
Select , and then press the
button.
Select , and then press the
button.
The devices that you can connect
the home theater to appear.
AndroidXXXXXXX Disconnected
You have three ways to complete the Wi-Fi
connection:
~
Through the Wi-Fi device.
~
Through the product using PBC.
~
Through the product using a PIN.
Each is covered below.
On the Wi-Fi device, follow the device's
procedure for connecting to another
device. See the device's user manual
for instructions.
When you have completed the procedure,
you should see a pop-up on your TV screen
saying that a device that supports
has requested to connect. Select ,
and then press the button to accept.
The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the
screen as connected.
~
The PBC and PIN procedures connect devices
automatically.
Select the device you want to
connect to this product, and then press the
button.
The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the
screen as connected.
Select the device you want to
connect to this product, and then press the
button.
The PIN pop-up appears.
Note the PIN code in the pop-up, and then
enter it into the appropriate field in the
device you want to connect.
The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the
screen as connected.
✎
The current wired or wireless network
connection will be disconnected when you use
the function.