Filter
Top Products
Settings
You can copy and import the NVR settings by using a storage media.
[MENU] Ö [ENTER] Ö ▼ Ö <Menu> Ö [ENTER] Ö <System> Ö ►▼ Ö <System Management> Ö
[ENTER] Ö ▼► Ö <Settings> Ö [ENTER] Ö ▲▼◄► Ö [ENTER]
•
Storage Device : Shows the connected storage device.
•
Export : Exports NVR settings to the connected storage device.
•
Import : Imports NVR settings from the storage device and applies to the NVR.
-
Uncheck the checkbox of an item(s) that you want to import.
Only the other items than the selected one will be applied to the NVR.
-
You cannot retrieve the configuration file from another mode. In other words, in PnP mode, you cannot
retrieve the manual setting information. In manual setting mode, you cannot retrieve the PnP setting
information.
•
Load Factory Default : Restore the factory default settings of NVR.
Uncheck the checkbox of an item(s) that you want to reset. Then, only the other items than the selected one
will return to the factory default.
If <Initialization> is selected, a confirmation dialog for "Load Factory Default" prompts. Press <OK> to
initialize the system to the factory default.
` After changing the mode, reboot to initialize. (PnP mode < -> manual setup mode)
M
` If you want to initialize the <Authority Setting>, you need to reset the password.
In case you reboot, reset it the Installation Wizard and if not, use the guide screen to reset it.
English _49
● MENU SETUP