A SERVICE OF

logo

SNMP
Using the SNMP protocol, the system or network administrator can monitor the network devices remotely as
well as the operating environment.
[MENU] Ö [ENTER] ÖÖ <Menu> Ö [ENTER] ÖÖ <Network> Ö ►▼ Ö <SNMP> Ö [ENTER] Ö
▲▼◄► Ö [ENTER]
Enable SNMP v1 : SNMP version 1 is used.
Enable SNMP v2 : SNMP version 2 is used.
-
Read Community : Enter the name of read-only community to access the SNMP information. By default it is
set to <private>.
-
Write Community : Enter the name of write-only community to access the SNMP information. By default, it
is set to <public>.
Enable SNMP v3 : SNMP version 3 is used.
-
Password : Set the initial user password for SNMP version 3.
Enable SNMP Traps : SNMP trap is used to send important events and conditions to the Admin System.
-
Trap Manager : Enter the IP address to which messages will be sent.
J
` SNMP v3 can be set only if the security connection method is set to HTTPS mode.
Refer to "SSL" for more details. (Page 82)
86_ menu setup
menu setup