Filter
Top Products
Camera Event
You can specify operation of events sent from your camera (motion detection, video analysis events, audio
events), alarm display methods, and alarm time.
[MENU] Ö [ENTER] Ö ▼ Ö <Menu> Ö [ENTER] Ö ▼ Ö <Event> Ö ►▼ Ö <Camera Event> Ö [ENTER]
Ö ▲▼◄► Ö [ENTER]
• Apply to CH : If you select <Apply to CH>, the "Apply to CH" confirmation window will appear.
After selecting channels that the settings will be applied to, click on <OK> to apply them to the selected
channels.
• Camera Event : Select whether or not to use a camera event.
• MD : Select whether or not to use motion detection from camera.
• Cam : Select an event detection channel.
• If you select a camera item, the "Camera preset" screen will appear. Select a channel to connect and set the
preset.
` You can set the preset in PTZ mode.
• Alarm : Select the method for alarm output.
` For more details, refer to "HDD alarm > Alarm". (Page 66)
• Alarm Duration : Set the duration of alarm.
• Camera MD : You can set the detailed setting of motion detection for a network camera connected.
-
Mode : Set the motion detection mode.
-
Area : Click on <Setup> and when the detailed setup menu appears, set the motion detection area.
-
Sensitivity : Set the sensitivity for motion detection. (very low/low//medium/high/very high).
-
Size : Click on <Setup>. When the detailed setup menu appears, set the max/min size of the object to be
detected.
-
Activation Time : Select the operation time of motion detection.
After finishing with setup, click on the <OK> button to move back to the previous screen after saving the setup.
74_ menu setup
menu setup