Sanyo DSR-3716 DVR User Manual

Open as PDF

of 126

SCREEN SET5

104 English

SETTINGS

Use the following procedure to set video from a specific

camera (including playback video) to be masked by a gray

pattern when it is not to be shown on a monitor screen.

Example:

Preventing the display of unneeded camera video at

the set period (as indicated by TIME PERIOD A and

TIME PERIOD B).

1 Make timer settings for “TIME PERIOD

A” and “TIME PERIOD B” from <TIME

PERIOD SET>. (JP.57)

Specify “TIME PERIOD A” and “TIME PERIOD B”.

2 Press the [MENU] button, turn the jog

dial to select “4. SCREEN SET”, and

then turn the shuttle dial clockwise.

The <SCREEN SET> screen is displayed. The cursor

moves to “1. MULTI SCREEN”.

3 Turn the jog dial to move the cursor to

“MASK”, and then turn the shuttle dial

clockwise.

“OFF” flashes.

4 Turn the jog dial to select “ON”, and

then turn the shuttle dial clockwise.

The cursor moves to “MASK SET”.

5 Turn the shuttle dial clockwise.

The <MASK SET> screen is displayed.

6 Turn the shuttle dial clockwise.

“T-1” starts to flash for “TIME PERIOD”.

7 Turn the jog dial to select T-1, T-2, T-3,

or T-4 for the time period, and then turn

the shuttle dial clockwise.

After setting the period, the cursor moves to channel 01 for

the “MAIN MON.”.

z Each camera can be set individually for the main

monitor, the monitor 2, and network video.

Setting masks

1.MULTI SCREEN : CHANGE

QUAD POSITION SET ->

MULTI 9 POSITION SET ->

MULTI 16 POSITION SET ->

2.SEQUENCE SET : 1S

SEQUENCE SET ->

MAIN/MON.2 MONITOR SET ->

3.MASK : OFF

MASK SET ->

4.COLOR LEVEL SET ->

1.MULTI SCREEN : CHANGE

QUAD POSITION SET ->

MULTI 9 POSITION SET ->

MULTI 16 POSITION SET ->

2.SEQUENCE SET : 1S

SEQUENCE SET ->

MAIN/MON.2 MONITOR SET ->

3.MASK : ON

MASK SET ->

4.COLOR LEVEL SET ->

TIME PERIOD : T-1 (06:00-11:30)

CH 01 02 03 04 05 06 07 08

MAIN MON. OFF OFF OFF OFF OFF OFF OFF OFF

MON.2 OFF OFF OFF OFF OFF OFF OFF OFF