Sanyo DSR-3716 DVR User Manual


 
RECORD SET3
74 English
SETTINGS
6 Turn the jog dial to select a recording
rate (7.5, for example), and then turn the
shuttle dial clockwise.
Camera No. 1 is now set to record at a rate of 7.5.
The cursor moves to “02”.
Valid recording rates
30*, 15, 7.5, 3.75, 1.875, 1, 0.5, 0.33, 0.25, 0.2, 0.1, 0.05,
0.03, OFF (Unit: FPS)
* A selection cannot be made when pre-alarm recording
has been set to “ON”.
7 Set recording rates for Camera No. 2
and Camera No. 3 in the same way.
8 With the cursor flashing on “04”
(camera number), turn the jog dial to
select “OFF”, and then turn the shuttle
dial clockwise.
Video from Camera No. 4 will not be recorded.
9 Use the same procedure to set Camera
No. 5 through Camera No. 16 to “OFF”.
10 If necessary, use this procedure to
setup other programs (i.e., No. 2
through No. 4).
11 Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
Use the following procedures to set recording start and
stop times using the timer function.
Timer setting items allow you to set times at which to start
and stop recording or recording rate on each specified day
of the week.
(1) WEEK
These fields are used to select the days of the week for
timer settings. When a day in the “WEEK” column is
flashing, it can be set to another day.The 7th line (default:
“SAT”) and 8th line (default: “DLY”) are used for timer
recording settings of over 24 hours.
(2) START
These fields are used to enter the time (24-hour time) at
which to start timer recording.
(3) STOP
These fields are used to enter the time (24-hour time) at
which to stop timer recording.
If the stop and end times are on different days (i.e.,
midnight is included), a “T” will be displayed to the left of
the end time.
(4) PROGRAM
These fields are used to enable timer recording using the
program function “P-1” through “P-4”. (JP.73)
(5) FPS
These fields are used to set the recording rate.
No setting is necessary here when using program
recording.
(6) SET
When set to “ON”, timer is enabled.
When set to “OFF”, timer is disabled.
(7) Settings for timer recording of over 24 hours
Use these lines for timer recording spanning more than 24
hours.
<PROGRAM REC SET>
PROGRAM : P-1
SELECT INDIVIDUAL CAMERA RATE(FPS)
01: 7.5 02: 1 03: 1 04: OFF
05: OFF 06: OFF 07: OFF 08: OFF
09: OFF 10: OFF 11: OFF 12: OFF
13: OFF 14: OFF 15: OFF 16: OFF
NORMAL REC : 55H
EXIT/OSD
Timer settings
Timer setting items
<TIMER SET>
WEEK START STOP PROGRAM FPS SET
SUN --:-- --:-- OFF 15 FPS OFF
MON --:-- --:-- OFF 15 FPS OFF
TUE --:-- --:-- OFF 15 FPS OFF
WED --:-- --:-- OFF 15 FPS OFF
THU --:-- --:-- OFF 15 FPS OFF
FRI --:-- --:-- OFF 15 FPS OFF
SAT --:-- --:-- OFF 15 FPS OFF
DLY --:-- --:-- OFF 15 FPS OFF
EXT ***** ***** OFF 15 FPS OFF
(1) (2) (3) (4) (5) (6)
(7)
e00_l8hbg_us_7.book Page 74 Thursday, November 25, 2004 1:44 PM