Sanyo DSR-3716 DVR User Manual


 
GENERAL SET4
English 93
Please contact your local store or service center regarding
hard disk expansion. A separately sold hard disk provided
by Sanyo will be required in order to perform this
procedure.
[Setting conditions]
z Initialization must always be carried out after hard disk
expansion.
The <HDD SET> screen
z MIRRORING: When hard disk expansion has been
carried out, the same video can be recorded to both
hard disks. Accordingly, if a problem occurs with
recording to one of the hard disks, the <HDD SET>
screen can be used to select the other hard disk for
provision of readable data. When mirroring has been
set, the recording rate is controlled automatically (i.e.,
set to half of the normal value) and the appropriate care
must be taken.
z PLAYBACK DRIVE: This parameter is used together
with “MIRRORING” and it indicates which of the two
hard disks is to be used to provide recordings for
playback.
z If a playback problem occurs while mirroring is turned
on, change the hard disk used for playback.
z If hard disk expansion has been carried out,
initialization is performed for both hard disks
simultaneously, and all data will be lost.
z All important recordings should be copied to
CompactFlash cards or another storage medium before
hard disk expansion.
z If a hard disk not provided by Sanyo is used, Sanyo
cannot be responsible for failures in performance or
operation.
Use the following procedure to make digital video recorder
menu settings and to monitor video from a PC via a
network (LAN).
A LAN cable must be connected to the LAN terminal on
the rear panel before proceeding.
z When connecting the digital video recorder to a
network, contact the network administrator in charge.
z Connecting to a PC directly
(without using a switch)
z Connecting to an intranet
(using a switch)
Expanding the hard disk capacity Network settings
Making network connections
2
1
3
4
Main Monitor
Monitor
(sold separately)
A cross-type LAN cable must
be used here.
(10 BASE-T/100 BASE-TX
Category 5)
PC
1-16
ALL
RESET
2
1
3
4
Main Monitor
Monitor
(sold
separately)
PC
Switch
Switch
PC
A straight-type LAN cable
must be used here.
(10 BASE-T/100 BASE-
TX Category 5)
Intranet
1-16
e00_l8hbg_us_7.book Page 93 Thursday, November 25, 2004 1:44 PM