Sanyo DSR-3716 DVR User Manual


 
SEARCHING FOR RECORDED VIDEO5
English 37
6 Turn the jog dial to select “PREVIEW”.
7 Turn the shuttle dial clockwise.
Each time the shuttle dial is turned clockwise, a different
motion sensor screen will be displayed on the preview
screen.
If “NOT FOUND” is displayed
Carry out motion sensor setting again.
8 Turn the jog dial to select “VIEW”, and
then turn the shuttle dial clockwise.
Normal playback will be started for the specified recording.
z By specifying a camera number (or channel) and
performing MOTION DETECTION SEARCH, playback
can be carried out for only the specified camera
number.
In such a case, the title information, date information,
and/or time information may partially disappear.
z To playback a recording from a different camera, stop
the current playback and then repeat the setting
process from the beginning.
Viewing video detected by the motion sensor
on a full screen
<MOTION DETECTION SEARCH>
SEARCH FROM : ALARM / CHANNEL : 4
START :
01-05-04 10:00
END :
01-05-04 20:00
MOTION SENSOR ->
PREVIEW ->
VIEW ->
MOVE:JOG SELECT:SHUTTLE
e00_l8hbg_us_7.book Page 37 Thursday, November 25, 2004 1:44 PM