Sanyo DSR-3716 DVR User Manual


 
MENU CONFIGURATION AND OPERATIONS1
48 English
SETTINGS
The jog dial and shuttle dial are used for movement and
confirmation in sub-menus and setting screens.
Use the [CAMERA SELECT] buttons on the front panel to
enter numbers and channels (camera numbers). Numbers
can be entered when “K” is displayed at the top-right of the
menu screen. (JP.121)
Use the following procedure to restore only those items in
the displayed setting screen to their default values.
1 Open the screen containing the items to
be returned to default settings.
2 Press the [MENU RESET] button.
The displayed settings are restored to their default values.
Movement and confirmation in sub-menus and
setting screens
(1)
To move the cursor
up or down
Turn the jog dial.
(2)
To move the cursor
right or to confirm
an item
Turn the shuttle dial
clockwise.
(3)
To change a
setting value
Turn the jog dial.
Entering numbers with the numeric keys
Numbers to be
entered
Button guide
1 to 9 No. 1 to No. 9 [CAMERA SELECT] buttons
0 [QUAD] button
<RECORDING AREA SET>
TOTAL CAPACITY : 82GB
NORMAL RECORDING AREA : 80 %
AREA FULL RESET ->
ALARM RECORDING AREA : 19 %
AREA FULL RESET ->
ARCHIVE AREA : 1 %
AREA FULL RESET ->
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
(2)
(3)
(1)
<LANGUAGE/LANGUE/IDIOMA> K
ENGLISH
<CLOCK SET>
01-01-2004 THU 00:00:00
<DAYLIGHT SAVING>
MODE : USE
WEEK MONTH TIME
ON 1ST-SUN 04 02:00
OFF LST-SUN 10 02:00
<EXT.CLOCK SET>
ADJUST. TIME 01:00
Restoring menu setting items to their
default values
[MENU RESET] button
e00_l8hbg_us_7.book Page 48 Thursday, November 25, 2004 1:44 PM