Sanyo DSR-3716 DVR User Manual


 
GENERAL SET4
98 English
SETTINGS
4 Turn the jog dial to select a protocol and
then turn the shuttle dial clockwise.
The “ADD.” column flashes.
[Settings] ( indicates default setting)
5 Set address (1 to 127) with the jog dial
or numeric keys and turn the shuttle
dial clockwise.
Address can be set only for “SANYO COAX” or “SANYO
RS485” protocols.
6 Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
z Camera control is only available for camera models
supporting coaxial control or SANYO SSP control.
Other companies’ cameras such as RS-485 and RS-
422 are unsupported. For supported cameras, check
the Sanyo homepage or ask at your local Sanyo dealer.
Sanyo website URL:
http://www.sanyosecurity.com
Setting Description
OFF Camera control is disabled.
SANYO COAX
Camera control is enabled using
SANYO (SSP) protocol coaxial super-
imposition.
SANYO RS485
Camera control is enabled using
SANYO (SSP) protocol RS-485.
BBV COAX
Camera control is enabled using BBV
protocol.
PELCO COAX
Camera control is enabled using
PELCO protocol.
<CAMERA CONTROL SET> K
CH PROTOCOL ADD. | CH PROTOCOL ADD.
01 SANYO COAX --- | 09 OFF ---
02 OFF --- | 10 OFF ---
03 OFF --- | 11 OFF ---
04 OFF --- | 12 OFF ---
05 OFF --- | 13 OFF ---
06 OFF --- | 14 OFF ---
07 OFF --- | 15 OFF ---
08 OFF --- | 16 OFF ---
<CAMERA CONTROL SET>
CH PROTOCOL ADD. | CH PROTOCOL ADD.
01 SANYO COAX 011 | 09 OFF ---
02 OFF --- | 10 OFF ---
03 OFF --- | 11 OFF ---
04 OFF --- | 12 OFF ---
05 OFF --- | 13 OFF ---
06 OFF --- | 14 OFF ---
07 OFF --- | 15 OFF ---
08 OFF --- | 16 OFF ---
EXIT/OSD
e00_l8hbg_us_7.book Page 98 Thursday, November 25, 2004 1:44 PM