Filter
Top Products
11
Remote Control & Setup menu
Follow the steps below to reset personal preferences for using
the DVD recorder. Confirm that all connections are secured
properly.
1. Press [
STANDBY/ON] to turn on the unit.
2. Press [SETUP] to display the system menu.
3. Press [] [] to select “System,” “Language,”
“Playback,” “Record,” “Audio,” “TV Tuner” or “Exit”
and press [] or [] to move to the next or
previous menu.
4. Press [][] to select the item you want to
change.
(Refer to the “GUI operation” section for detailed menu)
5. Press [ENTER] to confirm the setting.
6. Press [SETUP] to exit the setup menu or press []
to return to the previous menu.ot
Notes:
1. To record TV programs using the Timer Record feature,
you must set the time accurately.
2. Please see also “GUI(Graphical User Interface) Operation“
on page 42/43 for further information.
Setting the date and time
Check that the clock is correctly set before initiating the timer
recording function. If the clock is set incorrectly, Timer Record
results may not be accurate.
Set the date
1.Press [SETUP] and the setup menu will
be displayed.
2. Select “System” using [] or [] and press [ENTER].
3. Select “Date” using [] or [] and press [ENTER].
4. Change the day/month/year in the highlighted field using []
or [] or the numbered buttons (0~9) on your remote
control and confirm by pressing [ENTER].
5. When all settings are correct, press [] to return to the
main menu.
6. To exit the setup menu, press [SETUP].
Set the time
1. Press [SETUP]. The setup menu will appear.
2. Select “System” using [] or [] and press [ENTER].
3. Select “Time” using [] or [] and press [ENTER].
4. Change the “hour/minute/second” in the highlighted field
using [] or [] or the numbered buttons (0~9) on your
remote control.
5. When all settings are correct, press [] until returning to
the main menu.
6. To exit the setup menu, press [SETUP].
Notes:
Setting Audio
Press [SETUP] and select “Audio.”
Digital Output
PCM Bit Stream
(Enable digital audio output with PCM or encoded data)
DTS Out
On / Off
Surround
Stereo DOLBY DTS
TV sound Bilingual
Main Sub
MPEG
PCM Bit Stream
SETUP MENU
Note:
If you accidentally set “Progressive” as the Video Output
when not connecting to a progressive scan-compatible TV,
you may lose the video signal on your TV instantly. To get the
picture back, press [(Cursor Right)] and the numbered
buttons “5,” “0,” “2” and “0” on the remote control and then
[ENTER]. In about 8 seconds, you can re-set the video output.
Setting video output
1.Press [SETUP] and the setup menu will be displayed.
2.Select “System” using [] or [] and press [ENTER].
3.Select “Video Output” as “Scart S-Video,” “Scart RGB”
“Component” or “Progressive” using [] or [] and press
[ENTER]. (Refer to “GUI operation” section for details)
4.When all settings are correct, press [] to return to the
main menu.
5. To exit the setup menu, press [SETUP].
Progressive Scan mode
You can change the video output mode when you press
[SETUP] and select “System-->Video Output-->
Progressive.”
Video output mode:
576i: Interlace video 576p: Progressive video
You must connect the component output on the unit to a
576p compatible television.
Setting Aspect ratio
Press [SETUP] and select “Playback”-->”Aspect Ratio.”
Select “4:3” (regular) or “16:9” (widescreen) to suit your
television. If you have a regular 4:3 television, you can also
select how video title on some discs is presented.
4:3 L.Box (4:3 Letter Box)
Select when you connect the unit to a
normal (4:3) TV.
When playing back a DVD-VIDEO disc
recorded in wide picture format, the picture
is shown with black bars at the top and bottom.
4:3 Pan (4:3 Pan & Scan)
Select when you connect the unit to a
normal (4:3) TV.
When playing back a DVD-VIDEO disc
recorded in wide picture format, the picture
is zoomed to fill the screen vertically, and
the left and right sides of the image are chopped off. Note,
however, that the picture will be shown in the 4:3 L.Box (4:
3 Letter Box) mode even if you select the 4:3 Pan (4:3 Pan &
Scan) mode depending on the disc.
16:9 Wide (16:9 Wide Screen)
Select when you connect the unit to
a wide-screen (16:9) TV.
Note:
When stereo broadcasting is received, L, R or MONO cannot
be selected for output audio.