Filter
Top Products
37
EDIT
Splitting a title (HDD or DVD+RW only)
Use this function to divide a title into two distinct sessions. After
splitted, the new title can still be merged again. This function is
only applicable to titles with length longer than 6 seconds.
1. Press [BROWSER] to display the “Browser”
menu.
2. Press [] [] [] [] to select the title you want
to edit and then press [EDIT] to go to the edit
screen.
3. Press [PLAY] to start the title playback first.
Press [ NEXT] or [ PREV] to advance
to the next chapter or the previous chapter.
Press [ FF] or [ REV ] to perform fast
forward or fast rewind scanning.
4. Move the highlighted cursor to “Split” and press
[ENTER] for confirmation.
The title is splitted into two titles at where you press [ENTER]
during playback.
5. When complete, the browser menu will be displayed.
6. To split more titles,
repeat from step 2 to
4. Or press [] [] to
select “Exit” and then
press [ENTER] to exit
the setting.
Note:
The split function is only
applicable to video titles
longer than 6 seconds.
Merging two titles into one (HDD or DVD+RW only)
Use this function to merge two titles into one.
After merged, the new title can still be splitted again.
1. Press [BROWSER] to display the “Browser” menu.
2. Press [] [] [] [] to select the title you want
to edit and then press [EDIT] to go to the edit
screen.
3.Press [] [] to select “Merge with...” and then
press [ENTER].
A menu shows all the titles applicable to this function will
display.
4. Press [] [] [] [] to select the title to merge
and then press [ENTER].
5. To merge more titles, repeat from step 2 to 4. Or
press [] [] to select “Exit” and then press
[ENTER] to exit the setting.
Erasing a title (HDD and DVD only)
Use this function to erase a title.
Note that once erased, the title(s) cannot be retrieved.
1. Press [BROWSER] to display the “Browser” menu.
2. Use [] [] [] [] to select the title you want to
edit and then press [EDIT] to go to the edit screen.
3. Press [] [] to select “Erase”.
4. Press [ENTER] to confirm your setting.
The title selected is erased.
5. To erase more titles, repeat from step 2 to 4. Or
press [] [] to select “Exit” and then press
[ENTER] to exit the setting.
Note:
You CANNOT erase recorded title(s) on a DVD+R disc if
the disc is finalized.
Notes:
1. For video titles recorded on a DVD+RW disc, you can only
merge the title with its previous/next title and only when the
previous/next title has the same recording quality, TV signal,
audio and video settings. Otherwise, the function will not be
applicable.
2. For video titles recorded on the built-in HDD, you can merge
the title with any of the titles recorded on the HDD with the
same recording quality, TV signal, audio and video setting.
Setting a title thumbnail (HDD and DVD only)
Normally the first picture of a recording is used as the index
picture. However, you can choose any picture from the recording
as the index picture.
1. Press [BROWSER] to display the “Browser” menu.
2. Use [] [] [] [] to select the title you want to
edit and then press [EDIT] to go to the edit screen.
3. Press [PLAY] to start the title playback first.
Press [
NEXT] or [ PREV] to advance to
the next chapter or the previous chapter.
Press [ FF] or [ REV ] to perform fast
forward or fast rewind scanning.
Press repeatedly to play the title forward or reverse.