Sanyo DVR-H200UK DVR User Manual


 
13
CHANN EL EDITOR
Moving up or moving down the TV channel
1.Press [] [] to select one of the TV channels
and press [].
2.Press [] [] to select “Move Up” or “Move
Down” and press [ENTER].
The order of the TV channel will be changed.
Each time you press [] or [] and the item changes as
follows:
3. To move the location of other TV channels, repeat
step 1~2 to complete the settings.
4. Press [] [][] [] to select “Exit,” press
[ENTER] to save the setting and exit the
“CHANNEL EDITOR” menu.
To access to the Channel Editor menu, press [SETUP], select
“TV Tuner,” “Utilities,” “Edit Channel” and press [ENTER]. Or,
press [SOURCE] to set “TV” as the input signal source and
press [EDIT]. Either way, the Channel Editor menu will be
displayed.
Swapping TV channels
This function allows you to manually swap the TV channel
order stored in the unit to match the TV channel order stored
in your TV set.
1. Press [] [] to select a TV Channel and press
[].
2. Press [] [] to select “Swap With” and press
[ENTER].
3. Press [] [][] [] to enter the “Channel
number,” and press [ENTER] to swap. The order
of the channels will be swapped with the channel
number entered.
4. To swap other TV channels, repeat step 1~3 to
complete the settings.
5. Press [] [][] [] to select “Exit,” press
[ENTER] to save the setting and exit the
“CHANNEL EDITOR” menu.
Renaming TV channels
1. Press [] / [] to select a TV channel and press
[].
2. Press [] [] to select “Rename” and press
[ENTER].
The display for
entering a title name
appears.
3. Select the desired
characters from the
keypad. Press
[ENTER] after each
entry.
4. When you finish
entering the title name, press [] [] [] [] to
select “Finish” and press [ENTER].
Notes:
1. You can only enter up to 10 characters for a name.
2. If you wish to enter “space”, select a blank on the keypad
and press [ENTER].
Inserting TV channels
1. Press [] [] to select a TV channels and
press [].
2. Press [] [] to select “Insert To” and press
[ENTER].
3. Press [] [][] [] to enter the “Channel
number,” and press [ENTER]. The channel will be
moved to the desired location.
4. To change the locations of other TV channels,
repeat step 1~3 to complete the settings.
5. Press [] [][] [] to select “Exit,” press
[ENTER] to save the setting and exit the
“CHANNEL EDITOR” menu.