Filter
Top Products
24
After recording is stopped, a DV control bar will appear on the
screen. This allows basic DV control utilizing this DVD
recorder’s remote control.
1. Press [] [] to select “ ” and press [ENTER] to
start the DV Camcorder playing.
2. Press [] [] to select “
” and press [ENTER]
during playback mode to forward search the DV
Camcorder.
3. Press [] [] to select “
” and press [ENTER]
during playback mode to backward search the DV
Camcorder.
4. Press [] [] to select “
” and press [ENTER]
during playback mode to stop the DV Camcorder
playing.
5. Press [] [] to select “
” and press [ENTER]
during playback mode to pause the DV Camcorder
playing.
Notes:
1. The DV-Link input jack on this unit is for use with DV
compatible camcorders only.
2. Only DV signals can be input to the DV-Link jack on this
DVD recorder.
3. Do not connect a MICRO MV format video camcorder to
this DV-Link (IEEE-1394) jack.
DV control
RECORDING
DV Recording -- One-Touch Recording
Before you start to record DV contents
This unit allows basic DV control on screen. The on screen
functions are accessed using the DVD recorder remote control.
1. Power on your TV and this DVD recorder.
2. Press [HDD/DVD] to set the target device for the
recording.
If “DVD” is set as the target device, press [ OPEN/CLOSE]
to open the disc tray and insert a recordable disc with the
label side facing up.
If a new recordable CD-R or CD-RW is used for recording, press
[] [] [] [] to select the disc format. The disc is to be
prepared as and press [ENTER] .
3. Connect the DV Cable (IEEE-1394 4-pin to 4-pin
cable) to both the DV Camcorder and this DVD
recorder.
4. Power on the DV Camcorder. Set “Playback
mode” on the DV Camcorder.
5. “Pause” the DV Camcorder at where you want to
record.
6. Press [SOURCE] to change the “Signal-Input
source” and select the “DV-in” input.
7. Resume DV Camcorder playback and press
[REC ] on the DVD Recorder to start
recording.
8. To pause recording.
Press [PAUSE/STEP ] on the remote control to pause
recording. Press [
PAUSE/STEP ] again, if you want to
resume recording.
9. To stop recording.
Press [ STOP ] to stop recording.