Sanyo DVR-H200UK DVR User Manual


 
23
RECORDING
One-touch recording
Use “One-touch recording” to start recording immediately in 30-
minute blocks. Press [
REC ] twice to start a 30-minute
recording session. Press [
REC ] repeatedly to record longer
timed recordings, up to 6 hours in thirty-minute increments.
Pressing [
REC ] when the timed recording exceeds the 6-
hour constraint automatically sets “one-touch recording” off.
For recording on DVD discs, the length of recording depends
on the current recording mode/speed and the amount of time
available on the disc. For recording on the built-in HDD, the
length of recording is 6 hours maximum.
DV recording
Before you start to record DV contents
This DVD recorder allows basic DV control functions with the
remote control. The DVD recorder is equipped with a camcorder
control (Play, Stop, FF or REV) feature via the DV Link
connection. Simply move the screen cursor to the desired
function on the DV input screen and press [ENTER] on the
remote control.
If you are to record DV signals on a disc, press [
OPEN/
CLOSE] to open the disc tray and insert a recordable disc.
If a new recordable CD-R or CD-RW is used for recording, press
[] [] [] [] to select the disc format the disc is to be
prepared as and press [ENTER] .
1. Power on your TV and this DVD recorder.
2. Connect the DV cable (IEEE-1394 4-pin to 4-pin
cable) to both the DV Camcorder and the DVD-
Recorder.
3. Power on the DV Camcorder. Start “Playback
mode” on the DV Camcorder.
4. “Pause” the DV Camcorder at where you want to
record.
5. Press [GUIDER] on the remote control.
This activates the Easy Guider menu.
6. Press [] [] to select the “Record” icon, and
press [ENTER] to start recording.
Use “Easy Guider” Menu to record DV signal
Note:
Before playing a DVD+R disc on another player, you will first
need to finalize the disc. Reference the “finalize” function in
the “Disc Tools” section for additional information.
7. Press [] [] to select “DV” Input, and press
[ENTER] to confirm.
8. Press [] [] to select a recording mode and
press [ENTER]. (For DVD disc or HDD only)
9. “Go!” is selected. Press [ENTER] to start
recording.
Note:
This DVD-Recorder will stay in “Pause” mode when no DV
input signal is detected.
10.To pause recording.
Press [PAUSE/STEP ] on the remote control to pause
recording. Press [
PAUSE/STEP ] again, if you want to
resume recording.
11.To stop recording.
Press [ STOP]