Filter
Top Products
20
Note:
You can also use the numbered buttons to select a channel.
5.Press [REC ] to start recording.
When recording is completed it may take a few
moments for the session to close.
Recording continues until you stop the recording or when the
disc or the HDD is full.
To stop recording
When you press [ STOP] , it may take a few moments for
recording to stop and the session to close.
To pause recording
Press [PAUSE/STEP] to pause recording, and press [
PAUSE/STEP] again to resume recording.
To change the recording mode before recording:
Press [SETUP] button.
To change the TV Audio setting before recording:
Press [SETUP] button.
Note:
The new setting can't change the current recording mode but
will be activated during the next recording session.
To check the disc status while recording
Press [DISPLAY] , the recording information appears.
Before recording
1. This DVD recorder records on DVD+R/+RW,CD-R/RW
discs and the built-in HDD. Please use recommended
recordable discs to ensure the best recording quality.
2.DVD+R and CD-R are write-once discs.
3.DVD+RW and CD-RW are a re-writable discs.
4.You cannot add new recording sessions to DVD+R discs
after the discs are finalized.
5.In some cases, you may not be able to add new recording
(s) to a recordable DVD disc that contains contents written
on other DVD recorders.
6. A disc records 49 video titles maximum. A title recorded
on a DVD disc contains 99 chapter marks maximum. And a
disc contains 254 chapter marks totally maximum.
7. A title recorded on the built-in HDD contains 999 chapter
marks maximum.
RECORDING
Cautions:
Recording television programs
1.Press [ STANDBY/ON] to turn the unit on.
2.Press [HDD/DVD] to set the target device as “HDD”
or “DVD.”
If “DVD” is selected as the target device, press [ OPEN/
CLOSE] to open the disc tray and insert a recordable disc.
Press the button again to close the tray.
When you insert a new recordable DVD disc, the DVD recorder
automatically starts the disc preparation process.
When you insert a new recordable CD-R or CD-RW disc, press
[] [] [] [] to select the disc format the disc is to be
prepared as.
3.Press [REC MODE] continuously to select the
desired recording quality.
HQSPLPEPSLP
Press [SOURCE] and press [] [] to select “TV”
as the signal-input source.
4.Press [ CH + or - ] or press [] [] to select the
TV channel you want to record.