Filter
Top Products
26
Setting the timer
1. Press [ STANDBY/ON ] to turn the unit on.
2. Press [TIMER] to display the “TIMER RECORD”
menu.
3. Press [][] to select an item from the timer
setting list and press [ENTER] to activate the
system setup menu for the Timer Record function.
4. Press [] [ ] [][] to select “Source
(Signal Source),” and then press [ENTER] to
bring up the list.
Press [] [] and [ENTER] to make your selection.
5. Press [] [] [][] to select “Channel (TV
Channel),” and then press [ENTER] to bring up
the list. This step only applies when the “TV” is
selected as the source.
Press [] [] and [ENTER] to make your selection.
6. Press [] [] [][] to select “HDD/DVD,”
and then press [ENTER] to bring up the list.
Press [] [] and [ENTER] to make your selection.
7. Press [] [] [][] to select “Mode
(Recording Quality),” and then press [ENTER] to
bring up the list.
Press [ ] [] [] [] and [ENTER] to make your selection.
Recording quality for timer recording on DVD discs and
HDD:
HQ <-> EP <->LP<->SP <-> SLP <-> Just Fit
Recording quality for timer recording on CD discs:
Audio CD <-> VCD <-> SVCD
Prior to timer record
Please ensure that the recordable disc or the HDD has enough
available space for the Timer Record function. Before you start
to record, follow the steps to set the date, time, picture quality
and channel of the program or input source manually. You can
set up 16 individual sessions in the Timer Recording function.
TIMER RECORD
8. Press [] [] [][] to select “Repeat
(Once, Daily or Weekly),” and then press [ENTER]
to bring up the list.
If you select “Once,” you need to set the date. Move the cursor
to highlight “date” and press [ENTER]. Use the numbered
buttons (0~9) or [] [] [] [ ] to enter the date.
If you select “Daily,” you do not need to set the date since the
Timer Record is set for each day until the timer recording item is
cancelled or the media is full.
If you select “Weekly,” a weekly calender will display on-
screen for you to select the day. Press [] [] [] [] to
move the cursor to highlight the desired day and press
[ENTER] to make your selection. When completed, move the
cursor to “OK” and press [ENTER] to save the desired setting.
Note:
If the mode is set as “Daily” or “Weekly,” press [] [] []
[] to move the highlighted cursor to the “Advanced” icon
and press [ENTER]. You can choose to apply the setting
“Without Restriction” or “With Restriction.” When “With
Restriction” is selected, enter the “Start” date and “End” date
to set the period of time for a valid setting. Move the high-
lighted cursor to “OK” and press [ENTER] to confirm the
setting or to “Cancel” and press [ENTER] for resetting.