Sanyo DVR-H200UK DVR User Manual


 
28
7. Press [] [] [][] to select “HDD/DVD,” and
then press [ENTER] to bring up the list.
Press [] [] [] [] and [ENTER] to make your selection.
If “DVD” is set as the target device, press [
OPEN/CLOSE] to
open the disc tray and insert a recordable DVD disc.
8. Press [] [] [][] to select “Mode
(Recording Quality),” and then press [ENTER] to
bring up the list.
Press [] [] [] [] and [ENTER] to make your selection.
Press [] [] to re-select the item you want to change.
Recording quality for timer recording on DVD discs and the
HDD:
HQ <-> EP <->LP<->SP <-> SLP <-> Just Fit
Recording quality for timer recording on CD discs:
Audio CD <-> VCD <-> SVCD
9. Press [] [] [][] to select “Sound (TV
Sound BIL)” and then press [ENTER] to bring up
the list.
10.Press [] [] [][] to select “PDC”and then
press [ENTER] to set it on or off.
Press [] [] [] [] and [ENTER] to make your selection.
11. Press [][] to select “OK”and [ENTER] to save
the setting or the timer record item and go back
to the Timer Record list.
Press [] to [Reset] if you want to reset the timer record
item.
12. Press [] [] to go to another item on the list
and press [ENTER] if you want to set up for more
Timer Record programs.
If not, move to the “Exit” icon and press [ENTER] to exit the
Timer Record List.
TIMER RECORD
Notes:
1. When the Timer Record function is active, the “TIMER
LED” on the DVD Recorder front panel will illuminate.
2. The DVD recorder must be turned off to activate the Timer
Record function.
3. Make sure that a recordable DVD disc or a well-prepared
CD-R/RW disc is placed before the scheduled time,
corresponding to the selected recording quality.
4. When “Once” timer recording is set, it cannot be changed
to “Weekly” timer recording. Select “Weekly” first in case
of “Weekly” timer recording.
6. Press [] [] [][] to select “PlusCode#
(PlusCode number),” and then press [ENTER] to
enter the number.
Use the numbered buttons (0~9) or [] [] [] [] to enter
the PlusCode number.
Note:
If the Preset Channel of this GCN is not set, the following
screen will appear. Use the numbered buttons (0~9) or []
[] [] [] to enter the Preset Channel and press [ENTER] to
comfirm.
13.Press [ STANDBY/ON] to turn off the unit and
activate the “Timer Record” function.