Sony DSR-2000AP DVR User Manual


 
Chapter 3 Recording and Playback
Chapter 3 Recording and Playback 55
Dynamic Motion Control (DMC) Playback
Overview
DMC playback allows you to vary the playback speed for a certain section
of a tape, in variable mode (from 1 to +1 times normal speed), and store
the varying speed in memory for later playback at the same varying speed.
For example, during a live broadcast of a sporting event you can set the
start and end points of highlights while recording, and then provide
immediate DMC playback of those highlights.
During DMC playback the tape moves as shown in the following figure.
On-air start point
Preroll point Speed variation start point
Speed variation end point
On-air end point
Waiting for the on-air cue
before starting DMC playback.
Stop
Press the REVIEW button.
Normal speed
playback
DMC playback
Normal speed playback
Stop
Press the REVIEW button
again at the on-air cue.
Starting DMC playback
immediately after preroll
Press the PREVIEW button.
Normal speed
playback
DMC playback
Normal speed playback