Filter
Top Products
KLV-V40A10
2-682-277-11(1)
Watching TV
19
GB
Watching TV
1 Press 1 on the TV (right side) to switch on
the TV.
When the TV is in standby mode (the 1 (standby)
indicator on the front of the TV is red), press TV
"/1 on the remote to switch on the TV.
2 Press the number buttons or PROG +/- to
select a TV channel.
When using the number buttons, press the second
digit within two seconds. To select one-digit
channel numbers, press 0 and the channel number.
Tips
• If you press the number button without pressing 0 to select
a one-digit channel, you must wait for two seconds until
receiving the channel.
• You can have one-digit channels selected immediately
when you press the number buttons after setting “1Digit
Direct” to “On” (page 41).
Additional operations
Watching TV
2
1
2
To Do this
Turn off the TV
temporarily
(Standby mode)
Press TV "/1.
Turn off the TV
completely
Press 1 on the right side of the
TV.
Adjust the volume Press 2 + (increase)
/- (decrease).
Mute the sound Press %. Press again to restore.
Return to the
previous channel
watched (for more
than five seconds)
Press /-/--.
Select the surround
sound effect
Press . For details, see
page 37.
Switch the TV
automatically to the
standby mode after a
specified time period
– Sleep
Press . For details, see
page 46.
Switch the sound
between stereo and
mono, or languages
in bilingual programs
Press A/B/
.
Display the on-screen
information
Press / .
010COV.book Page 19 Tuesday, May 23, 2006 9:06 AM