Sony KLV-V32A10 Flat Panel Television User Manual


 
KLV-V40A10
2-682-277-11(1)
Using Settings
45
GB
Selects the type of the video jack to be used from those on the left side of the TV.
Press M/m to select one of the following, then press .
Auto: Activates the component video jacks (Y, PB/CB, PR/CR), however, the composite video
jack is selected when the component video jacks are not connected.
Off: Activates the composite video jack ( ).
Reduces the power consumption of the TV.
Press M/m to select one of the following, then press .
Standard: No benefit of Power Saving.
Reduced: To view pictures with reduced power consumption.
Picture Off: To turn off the picture. You can listen to the sound at the volume you select.
Tip
You can also select the power saving mode by pressing POWER SAVING repeatedly.
Automatically optimizes the picture settings according to the ambient light in the room.
Press M/m to select “On”, then press .
Provides an optimized display by automatically detecting the film content. Moving pictures
will appear clearer and more natural-looking.
Press M/m to select “Auto”, then press .
Tip
You can select this option for NTSC system pictures only.
Sets the color system of the TV to that of the source you want to play back.
Press M/m to select the color system, then press .
Usually select “Auto” so that an appropriate color system for the source is selected
automatically.
Resets all the manual settings to the factory settings.
Press < to select “Ok”, then press . Repeat this operation again.
Video2(Component)
Power Saving
Light Sensor
Cinema Drive
Color System
Initial Reset
TV
Video
TV
Video
PC
TV
Video
PC
TV
Video
TV
Video
TV
Video
010COV.book Page 45 Tuesday, May 23, 2006 9:06 AM