Sony KLV-V32A10 Flat Panel Television User Manual


 
KLV-V40A10
2-682-277-11(1)
52
GB
Specifications
Display Unit
Power Requirements:
110–240 V AC, 50/60 Hz
Screen Size:
KLV-V40A10: 40 inches
KLV-V32A10: 32 inches
KLV-V26A10: 26 inches
Display Resolution (horizontal × vertical):
1366 pixels × 768 lines
Power Consumption:
Indicated on the rear of the TV.
Dimensions (w × h × d):
KLV-V40A10:
Approx. 1015 × 723 × 371 mm (with stand)
Approx. 1015 × 684 × 122 mm (without
stand)
KLV-V32A10:
Approx. 808 × 588 × 309 mm (with stand)
Approx. 808 × 550 × 111 mm (without stand)
KLV-V26A10:
Approx. 675 × 512 × 309 mm (with stand)
Approx. 675 × 473 × 103 mm (without stand)
Weight:
KLV-V40A10:
Approx. 33.4 kg (with stand)
Approx. 27.2 kg (without stand)
KLV-V32A10:
Approx. 22.9 kg (with stand)
Approx. 18.9 kg (without stand)
KLV-V26A10:
Approx. 17.6 kg (with stand)
Approx. 13.6 kg (without stand)
Panel System
LCD (Liquid Crystal Display) Panel
TV System
I, D/K, B/G, M
Color System
PAL, SECAM, NTSC 4.43, NTSC 3.58
Antenna
75 ohm external terminal
Channel Coverage
B/G
VHF: E2 to E12 / UHF: E21 to E69 /
CATV: S01 to S03, S1 to S41
VHF: 0 to 12, 5A, 19A / UHF: 28 to 69 /
CATV: S01 to S03, S1 to S41(Australia only)
VHF: 1 to 11 / UHF: 21 to 69 /
CATV: S01 to S03, S1 to S41(New Zealand only)
I
UHF: B21 to B68 / CATV: S01 to S03, S1 to S41
D/K
VHF: C1 to C12, R1 to R12 / UHF: C13 to C57,
R21 to R60 /
CATV: S01 to S03, S1 to S41, Z1 to Z39
M
VHF: A2 to A13 / UHF: A14 to A79 /
CATV: A-8 to A-2, A to W+4, W+6 to W+84
Terminals
S VIDEO 1 (4-pin mini DIN):
Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO/AUDIO IN 1/3:
/
VIDEO:
1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO:
500 mVrms
Impedance: 47 kilohms
VIDEO/AUDIO IN 2:
//
Y, PB/CB, PR/CR (Component video):
Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative
P
R/CR: 0.7 Vp-p, 75 ohms
P
B/CB: 0.7 Vp-p, 75 ohms
Signal format: 480i, 576i, 480p, 576p, 720p,1080i
VIDEO:
1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO:
500 mVrms
Impedance: 47 kilohms
HD/DVD IN 1/2: /
Y, P
B/CB, PR/CR (Component video):
Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative
P
R/CR: 0.7 Vp-p, 75 ohms
P
B/CB: 0.7 Vp-p, 75 ohms
Signal format: 480i, 576i, 480p, 576p, 720p,1080i
AUDIO:
500 mVrms
Impedance: 47 kilohms
VIDEO/AUDIO OUT:
/
VIDEO:
1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO:
More than 1 Vrms at the maximum volume setting
AUDIO OUT:
More than 1 Vrms at the maximum volume setting
(Variable)
More than 500 mVrms (Fixed)
Additional Information
010COV.book Page 52 Tuesday, May 23, 2006 9:06 AM