Filter
Top Products
KLV-V40A10
2-682-277-11(1)
38
GB
Screen menu
Selects the wide mode manually. For details about the wide mode, see page 21.
Press M/m to select “Wide Zoom”, “Normal”, “Full” or “Zoom” (see page 21
for details), then press .
Tip
You can also select the wide mode manually by pressing repeatedly.
Automatically changes the screen format according to the broadcast signal.
Press M/m to select “On”, then press .
To keep your setting, select “Off”.
Tip
Even if you have selected “On” or “Off” in “Auto Wide”, you can always modify the format of the
screen by pressing repeatedly.
Note
This option cannot be used for 720p, and 1080i sources.
Sets the way to enlarge the 4:3 picture to fill the 16:9 screen.
Press M/m to select one of the following, then press .
Wide Zoom: Enlarges the 4:3 picture to fill the 16:9 screen, keeping the original image as
much as possible.
Normal: Returns the 4:3 picture to its original size.
Full: Enlarges the 4:3 picture horizontally only.
Zoom: Displays cinemascopic (letter box format) broadcasts in the correct proportions.
Off: Continues using the current Wide Mode setting when the channel or input is changed.
Note
This option cannot be used for 720p, and 1080i sources.
You can select the options listed below on the Screen menu.
To select options
1 Press .
2 Press M/m to select , then press .
3 Press M/m to select , then press .
4 Press M/m to highlight the option, then press .
indicates the available options for TV.
indicates the available options for video input.
indicates the available options for PC input.
Note
You cannot operate the Screen menu in Twin Picture, Picture Freeze,
and Photo mode.
Wide Mode
Auto Wide
4:3 Default
Screen
Select:
Enter:
End:
WEGA GATE
Wide Mode Wide Zoom
Auto Wide On
4:3 Default Wide Zoom
Display Area Noamal
Screen Shift
WEGA
GATE
TV
Video
PC
TV
Video
PC
TV
Video
TV
Video
010COV.book Page 38 Tuesday, May 23, 2006 9:06 AM