Filter
Top Products
KLV-V40A10
2-682-277-11(1)
Using Settings
41
GB
Setting “1Digit Direct” to “On”, you can switch the channel to the one assigned to a number
button as soon as you press the button. To enjoy the benefit of this feature, assign the
channels you frequently watch to the program positions which are equivalent to the number
buttons using “Program Sorting” (page 42).
Press M/m to select “On”, then press .
Tip
If there are many two-digit channels and you select them using the number buttons, select “Off”.
Assigns a channel name of your choice up to five letters or numbers. The name will be
displayed briefly on the screen when the channel is selected.
1 Press M/m to select the channel you want to name.
2 Press </, to select the position to input a character, M/m to select the
desired letter or number.
3 Repeat the procedure in step 2 until the name is complete, then press
.
Blocks an individual channel from being watched.
1 Press M/m to select the channel you want to block, then press .
2 Press M/m to select “Block”, then press .
To watch the channel, select “Allow”.
Skip Skips unused channels when you press PROG +/- to select
channels. (You can still select a skipped channel using the number
buttons.)
Press M/m to select “On”, then press .
To restore a skipped channel, select “Off”.
Sensitivity Adjusts the TV reception sensitivity if the TV signal is too strong
and the picture is distorted.
Press m to select “Low”, then press .
VHF Low/
VHF High/
UHF
Tunes in a channel manually.
Press </, until the desired channel’s broadcast
appears on the TV screen, then press .
Tip
The frequency range indication (VHF Low, VHF High, or UHF)
switches automatically as you keep pressing </,.
Note
If the TV reception is not satisfactory, adjust the above options.
1Digit Direct
Program Label
Program Block
Option Description
TV
TV
TV
010COV.book Page 41 Tuesday, May 23, 2006 9:06 AM