Filter
Top Products
70
Overview
Chapter 5 File Operations
File Operation Restrictions
This section explains which operations are possible on
files stored in each directory.
When required, the following operation tables distinguish
reading and writing from partial reading and writing.
Read: Read data sequentially from the start to the end of
the file.
Partial read: Read only a part of the data in the file.
Write: Write data sequentially from the start to the end of
the file.
Partial write: Write data to a part of the file only.
Root directory
a) Only when sub item “NAMING FORM” on the SETUP
>OPERATIONAL FUNCTION >FILE NAMING page is set to “free”
b) Only files which can be written by XDCAM
• Directories cannot be created in the root directory.
• The directories in the root directory (Clip, Edit, Sub, and
General) cannot be deleted or renamed.
Clip directory
a) With firmware version 1.5 and higher, the unit can handle files with user-
defined names in the “C*” part.
b) Possible with firmware version 1.5 and higher.
c) Only files which are 2 seconds or longer in length, in a format matching
the format (system frequency) and recording format (MPEG HD/DVCAM
and number of audio channels) of the recorded sections of the disc, and
which can be overwritten by XDCAM.
d) Only when the Write Inhibit tab on the disc is set to enable recording and
“REC INH” is set to “OFF”. With firmware version 1.1 and lower, only
the most recently recorded clip may be deleted. With firmware version 1.5
and higher, any clip may be selected and deleted.
e) Only files which can be written by XDCAM
f) With firmware version 1.5 and higher, when the “C*” part of a C*.MXF
file name is changed, a C*M01.XML file with the same name in the “C*”
part is also changed automatically.
g) When a C*.MXF file is created, a C*M01.XML file with the same name
in the “C*” part is created automatically.
h) When a C*.MXF file is deleted, the C*M01.XML file with the same name
in the “C*” part is also deleted automatically.
File name Content Operations
Read/Partial read Write/Partial write Rename Create Delete
INDEX.XML Contains data for management
of the material on the disc.
Ye s No N o N o No
ALIAS.XML
a)
Contains conversion tables for
assigning user-defined names
to clips and clip lists.
Ye s No N o N o No
DISCMETA.XML Contains metadata to indicate
the disc properties.
Ye s Ye s
b)
No No No
MEDIAPRO.XML Contains a list of material on
the disc, basic properties,
related information, and
information about access
methods.
Ye s No N o N o No
Other files Files other than the above – No – No –
Notes
File name Content Operations
Read/Partial read Write/Partial write Rename Create Delete
C
*
.MXF
a)
Clip file created by recording
(MXF file)
*: 0001 to 9999
Ye s N o No
b)
Ye s
c)
Ye s
d)
C
*
M01.XML
a)
Metadata file generated
automatically when C
*
.MXF file
is created.
*: 0001 to 9999
Ye s Ye s
e)
No
f)
No
g)
No
h)
Other files Files other than the above – No – No –