Filter
Top Products
77
System Menu
Chapter 6 Menus
System Menu
Use the system menu to set up the unit for specific
purposes and conditions. Menu settings are stored in
nonvolatile memory and are preserved even after the unit
is powered off.
The system menu is made up of the following five menus.
• Setup menu (SETUP MENU)
• TC preset menu (TC PRESET)
• Disc menu (DISC MENU)
• Date and time preset menu (DATE/TIME PRESET)
• Digital time display menu (HOURS METER)
This section explains the setup menu and the disc menu.
See page 38 “To record timecode after setting an initial
value (Internal Preset)” in Chapter 3 for more information
about the TC preset menu.
See page 27 “Setting the Date and Time” in Chapter 2 for
more information about the date and time preset menu.
See page 94 “Periodic Maintenance” in the appendixes
for more information about the digital time display menu.
Displaying the Setup and Disc
Menus
Menus appear in the monitor video section and in the time
data display section. If you have connected an external
monitor, they are also superimposed over the picture
shown on that monitor.
1
Press the MENU button.
The system menu appears.
The entire system menu appears in the monitor video
section and on the external monitor.
An uppercase and lowercase abbreviation of the
selected line only (the line in reverse video) appears in
the time data display section.
2
Press the M/MARK1 or m/MARK2 button to select
SETUP MENU or DISC MENU.
3
Press the ,/OUT button.
The setup menu (see page 79) or the disc menu (see
page 89) appears.
Setup Menu
As shown in the following figure, the setup menu has three
levels.
The top level shows a general classification of the setting
items in the menu. Except for MENU GRADE, the actual
setting items are found on the second or third level.
Setting items are divided into basic items, which are
needed for normal operations, and enhanced items, which
are needed for enhanced operations. In the figures, basic
items are shown in bold characters.
When the unit is shipped from the factory, the setup menu
is configured to display basic items only. To display
enhanced items as well, change the setting of the MENU
GRADE item.
For details, see “Displaying enhanced items” on page 88.
SYSTEM MENU
SETUP MENU
TC PRESET
DISC MENU
DATE/TIME PRESET
HOURS METER
SETUP MENU
OPERATIONAL FUNCTION
DISPLAY CONTROL
SETUP BANK OPERATION
MENU GRADE :BASIC