Filter
Top Products
86
System Menu
Chapter 6 Menus
Setup Menu Operations
This section explains how to change menu settings.
Buttons used to change settings
Use the following buttons to change menu settings.
WIRELESS RMT [> Wireless]: Enable or disable operation
from the wireless remote commander.
DISABLE [>> DISABLE]: Disable.
*ENABLE [>> ENABLE]: Enable.
METADATA [Metadata]: Metadata settings Description
INDEX POSITION [> Index Pos]: Specify which frame to use
as the thumbnail image (index picture) when recording.
0SEC [>> 0 sec] to 10SEC [>> 10 sec]: The frame at 0
seconds to 10 seconds from the top of the clip, specified in
units of 1 second.
Factory default setting: *0SEC
STORE OWNER [> Ownership]: Create UMID owner
information.
The STORED OWNERSHIP screen appears.
For details, see Appendix “Setting UMID ownership
information” on page 107.
DATA ITEM OUT [> DATA ITEM]: Specify whether to include
the information from extracted VANC packets in data
items.
OFF [>> OFF]: Do not include VANC packet information in
data items.
*ON [>> ON]: Include VANC packet information in data items.
SETUP BANK OPERATION [Setup Bank]: Settings related
to menu bank operations
Description
Menu bank: This unit allows three different complete sets of menu settings to be saved in what are termed “menu banks”
numbered 1 to 3.
RECALL BANK 1 [> Recall 1]: Recall menu settings from
menu bank 1.
Operate with the following procedure.
(1) Select the bank you want to recall, then press the ,/OUT
button.
Message “RECALL OK?” appears.
(2) To recall, press the SET button.
To quit recalling, press the RESET button
RECALL BANK 2 [> Recall 2] :Recall menu settings from
menu bank 2
RECALL BANK 3 [> Recall 3]: Recall menu settings from
menu bank 3.
SAVE BANK 1 [> Save 1]: Save current menu settings to
menu bank 1.
Operate with the following procedure.
(1) Select the bank you want to save, then press the ,/OUT
button.
Message “SAVE OK?” appears.
(2) To save, press the SET button.
To quit saving, press the RESET button.
SAVE BANK 2 [> Save 2]: Save current menu settings to
menu bank 2.
SAVE BANK 3 [> Save 3]: Save current menu settings to
menu bank 3.
MENU GRADE [Menu grade]: Selection of menu items to
be displayed
Description
Determine whether to display basic items only or both basic
and enhanced items in the monitor video section and the time
data display section when using the setup menu.
*BASIC [>> Basic]: Display basic items only.
ENHANCED [>> Enhanced]: Display both basic and
enhanced items.
INTERFACE SELECT [Interface]: Settings related to
interfaces
Description
Menu control buttons Functions
MENU button • Display and hide the menu.
• Return to the menu from
setting screens.
M/MARK1 and m/MARK2
buttons
These buttons move the
highlighted cursor up and down
within the current level to select
an item or setting. Hold down
one of these buttons to make
the highlighted cursor move
continuously.
</IN and ,/OUT buttons Press the ,/OUT button to go
down one level.
Press the </IN button to go
up one level.
Hold down one of these
buttons to make the highlighted
cursor move continuously.
Menu control buttons Functions