Filter
Top Products
10
Locations and Functions of Parts
IRIS/M.BLACK
ACTIVE
AUTO
RELATIVE
COARSE
SENS
OPENCLOSE
RELATIVE
MASTER
BLACK
EXT
IRIS
IRIS/M.BLACK
LINK
OPEN
CLOSE
Iris/master black control block (RCP-D50)
3 IRIS/M.BLACK LINK (iris/master black
adjustment link) button
Press and light up the button to perform linked
adjustments of iris and master black for several
cameras.
For details, see “Adjusting the Iris/Master Black of Multiple
Cameras at One Time” on page 57.
4 IRIS/M.BLACK ACTIVE (iris/master black
active) button
Press and light up this button to enable the iris/master
black control block of the panel.
When the PANEL ACTIVE button is pressed, this
button also lights.
If you press this button so that it goes dark, the panel
will be locked, preventing accidental misoperation.
1 MASTER BLACK display
Displays the current master black setting in the range
from –99 to +99.
2 MASTER BLACK RELATIVE button
When the IRIS/M.BLACK ACTIVE button is lit, the
master black adjustment mode can be selected with
this button.
Press and light up the button for Relative mode, or
press and turn it dark for Absolute mode.
When the IRIS/M.BLACK ACTIVE button is not lit,
Relative mode is automatically selected and this button
is not operative.
Note
When VR STD MODE is set to Absolute with the VR
Setting of the RCP Config menu, Relative mode is not
selected even if you turn the IRIS/M.BLACK
ACTIVE button off. When you turn the IRIS/
M.BLACK ACTIVE button on, the master black value
corresponding to the position of the master black
control ring is restored.
qaIRIS control lever
4IRIS/M.BLACK ACTIVE button
5AUTO button
6f-number display
7EXT indicator
8SENS control knob
9COARSE control knob
0Master black control ring
1MASTER BLACK display
2MASTER BLACK RELATIVE
button
qdIRIS RELATIVE button
3IRIS/M.BLACK LINK button
qsPreview switch