Filter
Top Products
16
Menu Configuration and Basic Menu Operations
Basic Configuration of Menu Display
Status display
When you do not select any menu or the signal from
the camera, the LCD shows the following status
display:
Initial display (Paint menu)
When you press and light the PAINT 1 (or PAINT 2,
PAINT 3) button of the menu operation block, the
initial display of the Paint menu is obtained.
Press either to flip the pages of the
menu.
The set values of the shutter and master gain
are displayed. You may adjust these items
using the Function menu.
You may adjust these items using the
WHITE, MASTER GAMMA, BLACK/
FLARE, and DETAIL knobs, and IRIS
control (or IRIS lever).
The “Black” columns can be changed to
“Flare” using the OTHERS menu.
To clear the adjusted values
The names of the items are
displayed. Press the name
of the item to be adjusted.
The color of the pressed
name area will change, and
the lower half of the panel
will become the adjustment
display (see the next page).
Current page number / total number of pages
Shutter
Status
Scene File : 2 DXC-D50
60
M. Gain
12dB
Filter
1
GammaWhite
000
Detail
0
0002
Black Iris
Clear
White Black Flare
Gamma
/Knee
1 / 5
On the status display, the set value
of each item is only displayed. The
setting is made with the Function
menu or with the corresponding
knob on the operation panel.
The ND filter number being selected
on the camera is displayed.
When you select a scene file,
the filename is displayed.