Filter
Top Products
30
Menu Configuration and Basic Menu Operations
Page Menu Submenu Control item Function
Paint 4 CLS/EVS TLCS To turn the TLCS (total level control) function ON/OFF
(cont.) Shutter To turn the shutter function ON/OFF
CLS To turn the CLS (clear scan) function (which reduces noise on the
horizontal scan lines when the monitor screen connected to a PC is
shot) ON/OFF
EVS To turn the EVS mode (which reduces flicker by increasing the
vertical resolutions) ON/OFF
• Shutter To select the shutter speed
• CLS To adjust the CLS frequency
Function menu (with the DXC-D30/D35 series)
Menu
Submenu
Control item Function
Operation Jump menu 1
To jump to the adjustment screen designated for Menu 1 in Menu Set
a)
(Default: White of Paint 1)
Jump menu 2
To jump to the adjustment screen designated for Menu 2 in Menu Set
a)
(Default:Black of Paint 1)
Jump menu 3
To jump to the adjustment screen designated for Menu 3 in Menu Set
a)
(Default: Flare of Paint 1)
Jump menu 4 To jump to the adjustment screen designated for Menu 4 in Menu Set
a)
(Default: Gamma/Knee
of Paint 1)
Jump menu 5
To jump to the adjustment screen designated for Menu 5 in Menu Set
a)
(Default: Detail of Paint 2)
Jump menu 6 To jump to the adjustment screen designated for Menu 6 in Menu Set
a)
(Default: Skin Detail of
Paint 2)
Jump menu 7
To jump to the adjustment screen designated for Menu 7 in Menu Set
a)
(Default: Matrix of Paint
3)
Shutter To turn the shutter function ON/OFF
• Shutter To select the shutter speed
CLS To turn the CLS (clear scan) function ON/OFF
• CLS To select the CLS frequency
TLCS To turn the TLCS (total level control) function ON/OFF
• Master Gain To select the master gain value among –3/0/3/6/9/12/18/18+DPR/24/24+DPR/HYPER Gain
SW Page1 Skin Detail To turn the skin detail function ON/OFF
Detail Gate To turn ON/OFF the display for the skin detail gate area (target color range for the skin detail
correction or the skin matrix adjustment)
ATW To turn the ATW (auto tracing white balance) function (which automatically adjusts the white
balance when lighting conditions change) ON/OFF
TLCS To turn the TLCS (total level control) function ON/OFF
Auto Knee To turn the Auto Knee function ON/OFF
Skin Matrix To turn the skin matrix function ON/OFF
Flare Off To turn the flare correction function ON/OFF (OFF while the button is lit)
Page 2 Knee Aperture To turn ON/OFF the detail correction to the level higher than the knee point
Aperture To turn the aperture correction ON/OFF
DL To turn ON/OFF the DynaLatitude function (for automatically setting the contrast between the
bright and dark areas by detecting the levels of the subject in these areas)
White Clip Off To turn the white clip function ON/OFF (OFF while the button is lit)
Detail Off To turn the detail adjustment function ON/OFF (OFF while the button is lit)
Gamma Off To turn the gamma adjustment function ON/OFF (OFF while the button is lit)
Matrix Off To turn the linear matrix adjustment function ON/OFF (OFF while the button is lit)
a) The submenu “Menu Set” can be selected from Security of RCP Config on the OTHERS menu.