Filter
Top Products
8
Locations and Functions of Parts
qf White balance control buttons
PRESET: Press and light this button to retrieve the
preset white balance of the camera.
A (memory A): Press and light this button to retrieve
the white balance stored in memory A of the
camera.
B (memory B) (valid only with the DXC-D50
series): Press and light this button to retrieve the
white balance stored in memory B of the camera.
Note
When the ATW (automatic tracing white balance)
function is active, the white balance control buttons are
not operative.
qg MASTER GAMMA knob
Used to adjust the master gamma.
qh DETAIL knob
Used to adjust the detail level.
qj MEMORY STICK slot and access lamp
Insert a Memory Stick to store setting data, such as
reference files and scene files of the video camera or
CCU.
The access lamp shows the status of the Memory
Stick.
Off: No Memory Stick is inserted.
Lit in green: There is a Memory Stick in the slot. In
this condition, you can safely eject the Memory
Stick.
Lit in red: Data are being read/written. If you eject
the Memory Stick in this condition, the data are
not guaranteed. All the data may be lost.
Note
If “Check Memory Stick” is displayed on the LCD in
the menu operation block, check that the Memory
Stick has sufficient unused storage space or it has been
properly formatted.
For details on Memory Sticks, see page 59.
PRESET
A
B
WHITE