Sony KDS-R70XBR2 Projection Television User Manual


 
Getting Started
24
4 HDMI IN 7/8 HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped audio/video equipment, such
as a set-top box, Blu-ray Disc Player, DVD player, and A/V receiver. HDMI supports
enhanced, or high-definition video, plus two-channel digital audio.
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN
8 (with HDMI-to-DVI cable and/or adapter) jack (rear panel), and connect the audio jack to
the HDMI IN AUDIO 8 (rear panel). (DVI connector is for video signals only.)
Be sure to use only an HDMI cable that bears the HDMI logo.
Do not connect a PC to the TV’s HDMI input. Use the PC IN (RGB IN) input
instead when connecting a PC.
HDMI connection is necessary to view 480i, 480p, 720p, 1080i, and 1080p
formats. Note that this TV displays all format types of picture in a resolution of
1,920 dots × 1,080 lines.
5 PC IN 9
RGB
Connect to a personal computer’s video output connector using an HD15-HD15 cable (analog
RGB, not supplied).
See “PC Input Signal Reference Chart” on page 77 for the signals that can be displayed.
For some Apple Macintosh computers, it may be necessary to use an adapter
(not supplied). If this is the case, connect the adapter to the computer before
connecting the HD15-HD15 cable.
If the picture is noisy, flickering or not clear, adjust the Phase and Pitch of the PC
settings, as described on page 65.
6 PC IN
AUDIO 9
Connect to the audio output jack on your personal computer.
7 HDMI IN
AUDIO 8
Connect to the audio output jack on your DVI-equipped device.
8 VIDEO IN 1
S VIDEO
Connects to the S VIDEO output jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than the composite video (9).
9 VIDEO IN 1/4
VIDEO/
L (MONO)-
AUDIO-R
Connect to the composite video and audio output jacks on your A/V equipment such as a VCR
or other video equipment. A third composite video and audio jack (VIDEO 2) is located on the
front panel of the TV.
0 HD/DVD IN 5/6
(1080i/720p/
480p/480i)/
L-AUDIO-R
Connect to your equipment’s component video (YP
BPR) and audio (L/R) jacks. Component
video provides better picture quality than the S VIDEO (8) or the composite video (9)
connections.
Component video (YPBPR) connection is necessary to view 480i, 480p, 720p,
and 1080i formats. Note that this TV displays all format types of picture in a
resolution of 1,920 dots × 1,080 lines.
Jack Description
HDMI-to-DVI cable
Audio cableHDMI adapter